Is Trailair Air Ride Pin Box Compatible with PullRite SuperGlide 5th Wheel Hitch

Question

Question:

I have a Montana HC w/Lip 1721 KP box. I pull with a F350 and PullRite slider hitch. My question- will part number 158777 work with my slider hitch?

asked by: Tim

1

Helpful Expert Reply:

According to PullRite the Trailair Air Ride 5th Wheel Pin Box # LC158777 (for a 1716 Lippert pin box) or # LC369535 (for a 1621 Lippert pin box) will need the PullRite quick connect capture plate 331761 for it to be compatible with your sliding 5th wheel hitch.

I'm not sure what the 1721 pin box number is as it isn't a normal pin box number which is why I mentioned the 2 different boxes above. If you actually do have a 1721 let me know and send me a picture of your sticker so I can reach out to my contact at Lippert.

expert reply by: Jon G

1

Tad L.

2/28/2020

I have a pull rite superglued 5th wheel hitch in my truck. Is there an air ride pin box that is compatible with my hitch, does it have a capture plate or is it built in the pin box

Chris R.

2/29/2020

The Trailair Air Ride pin boxes are compatible with the PullRite SuperGlide hitches, but a separate capture plate (sold by PullRite) is required. It's not something that would come included with the pin box. PullRite does have a handy fit chart on their site that tells you which capture plate is needed depending on the specific pin box model. We don't currently offer PullRite products.

Answer 1

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Jen, thanks for the information! Since your 2016 Ram 2500 has the Ram Boxes, you'll need to have a rotating pin box installed on your 2026 Jayco Eagle HT DDB. The rotating pin box is the only way to tow a 5th wheel trailer and not hit the Ram…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Is Trailair Air Ride Pin Box Compatible with PullRite SuperGlide 5th Wheel Hitch

Products Featured in This Question

Continue Researching