Where is Brake Controller Install Connector in 2019 Honda Ridgeline

Question

Question:

I am having trouble locating the female plug for a brake controller in my 2019 honda ridgeline..I bought the cable for a Tekonsha Primus IQ but still cant locate the plug under the dash...the truck has a factory hitch and 7 wire plug, so I assume it has the connection somewhere.. truck is a 2019 RTL-T ridgeline

asked by: PHILIP C

0

Expert Reply:

You are not the first person to have trouble finding the brake controller install harness on your 2019 Honda Ridgeline so don't feel bad. It's up by the emergency brake pedal and can be buried a bit.

I attached a picture that we got from a customer who was having a hard time finding his with the connector pointed out with pink arrows. The # 3070-P that you referenced is the correct install harness for the Primus IQ part # TK90160 you mentioned as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

view full answer...

Answer 2

Hey Sam that's quite a bit of rise! The only thing we have that comes close to 9" is the Curt Drawbar for 1-1/4" Hitches item #C45028. It has a 5-3/8" rise from the top of the inside of the hitch receiver. I checked with our…

view full answer...

Answer 3

Hey Larry that's quite a bit of rise! They don't make those for 1-1/4" hitches but I can get you closeish. You'll want to start with the Curt Class I Drawbar item #C45024. It has a 5" rise from the top of the inside of the hitch…

view full answer...

Answer 4

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 5

It's very easy to install a trailer brake controller on a 2021 Honda Ridgeline. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 which comes with a harness that you could simply attach to the one that came with the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Where is Brake Controller Install Connector in 2019 Honda Ridgeline

Continue Researching