Karavan Tandem Boat Trailer Slipper Spring Replacement, is Bushing On Hook End Required
Updated 08/14/2019 | Published 08/13/2019 >
Question:
I have a 2008 Karavan tandem boat trailer and I need to replace the springs. I found these springs on your website 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4inch Long Item # e33SR that will work great. The question I have is on the open eye end of the spring, is there a bushing that goes along with the bolt or does the bolt just sit alone and the spring will just hook around it? If I need a special bushing, could you recommend them also?
asked by: MARK F
Helpful Expert Reply:
The 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4inch Long Item # e33SR that you referenced does not require an additional bushing for the hook end to attach to the rear hanger. The hook end of the spring will rest on the spring bolt and the only bushing needed is on the eye side of the leaf spring.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Search Results: trailer leaf springs
- Search Results: leaf spring bushing
- Video: Hands-On with the CE Smith Trailer Suspension Shackle Straps
- Search Results: leaf spring bushings
- Q&A: Should a Nylon Bushing Be Used With the Open Eye End Of Slipper Spring # e33SR
- Search Results: bunk bracket kit
- Search Results: leaf spring kit square axle
- Search Results: spring eye bushing
- Search Results: galvanized shackle
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Q&A: Does the Open End Of The Slipper Spring Require a Bushing?
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Q&A: Correct Bushing and Bolt for 4-Leaf Slipper Spring # e33SR
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Q&A: Bolts Needed To Install Slipper Springs
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Q&A: Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Video: What to Know About the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: An In-Depth Look at the Single Axle Trailer Fender for Boat Trailers
- Video: Comprehensive Review: Spring-Eye Bolt with Locknut for Slipper Springs
- Article: Rust Prevention


