Diagram for 9-Pole and 7-Way Connectors

Updated 08/12/2019 | Published 08/11/2019

Products Featured in This Question

Pollak Heavy-Duty, 7-Pole, Round Pin Trailer Wiring Socket - Vehicle End

(154)

$13.86

Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID

(71)

$1.18

Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1

(72)

$1.21

Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End

(711)

$7.76

Question:

Is it possible for you to e mail a bigger picture of the instructions ?

asked by: Jedd D

Expert Reply:

I attached the picture you referenced to this page. If you click on it the picture should fill your screen and be easily viewable!

The diagram shows a 9 pole and a 7-way connection pin out for wiring up an adapter.

To do this you will need a replacement 7-blade connector like # PK12706. You will then disassemble the existing trailer connector and install the 7-way blade style connector. When you take apart the 9-pole connection point the functions should be labeled, and you will want to match up functions to the 7-way not necessarily match color for color. You may want to use ring connectors to connect the existing wires on your trailer cord wire to the new 7-way connector plug, like the # 44-5310A and # DW05702-1.

expert reply by: Jameson C