Can Brass Valve be Used on Atwood Water Heater Plastic Drain Plug

Question

Question:

Hello I have an Atwood water heater with plastic threads. It is in a 1997 truck camper. Will these threads work for that? Thanks

asked by: Joan W

1

Helpful Expert Reply:

Yes, as long as the threaded part on your Atwood water heater accepts a 1/2" fitting the Camco Water Heater Drain Valve Replacement # CAM11703 will work just fine even though it's brass.

expert reply by: Jon G

1

Answer 1

I recommend Camco Water Heater Drain Valve Replacement part #CAM11703 to replace the 1/2" plastic drain plug on your water heater.

view full answer...

Answer 2

The Camco Water Heater Drain Valve Replacement - 1/2" #CAM11703 is a durable brass fitting as are all of our water heater drain valve replacement options. If your water heater has aluminum threads as you mentioned, we do not have a fitting that…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Thanks for providing the dimensions and your current refrigerator model. Based on the 24" wide x 60" tall opening, I recommend the Furrion RV Refrigerator w/ Freezer #FR95TF. At 23-3/8" wide x 59-5/8" tall, it is really close to…

view full answer...

Answer 8

Hi Ryan; according to Blue Ox the installation time for the Blue Ox Base Plate Kit #BLU94ER is 6 hours.

view full answer...

Answer 9

Hello Richard, I do appreciate you reaching out, but I am sorry to say that we do not offer the leaf spring you are looking for. The closest thing we have for a 3,500 lb axle is the 4-Leaf Double-Eye Spring #e97SR which is 27" long so this would…

view full answer...

Answer 10

I was not able to find anything with the LM38166 part number provided. The RV City Water Inlet with Brass Check Valve #37262145 fits a 1-1/2" diameter cutout and has a 1/2" MPT fitting. We also have this with a 1/2" FPT fitting if that…

view full answer...

Answer 11

Hey Justin. The GE Appliances HE Low-Profile RV AC w/ Heat Pump item #GE86RR does not include a softstart. It has anti-vibration soft tubing and isolated rubber fan mounts to reduce noise. To reduce the amp pull when the compressor kicks on you can…

view full answer...

Answer 12

Hey Bruce! The SoftStartRV Soft Start #SSR54FR is what you need for your 13K Btu Furrion Chill HE AC unit. This is a universal kit so while it won't be plug and play, it will still work with your Furrion. What's the driving force pushing you…

view full answer...

Can Brass Valve be Used on Atwood Water Heater Plastic Drain Plug

Product Page this Question was Asked From

Continue Researching