Replacement Dexter Hubs for Lippert 3,500 Pound Axle

Updated 07/19/2019 | Published 07/17/2019

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2

(1072)

$136.91

Replacement Trailer Hub Bearing - L44649

(2074)

$14.16

Replacement Trailer Hub Bearing - L68149

(2074)

$14.31

Question:

Hi, I want to purchase a replacement hub assembly for my 2007 fleetwood pioneer travel trailer that has 3,500lb Lippert axles NV# 136180/ Serial# 224301. What type of replacement Dexter hub assembly will work for this? My inner bearing is L68149 and my outer bearing is L44649. The inner race is L68111 and the outer race is L44610. Thanks.

asked by: Joe N

Expert Reply:

If your existing hubs have a 5 on 4-1/2 inch bolt pattern the Dexter Trailer Hub and Drum Assembly # 84546UC3 will work perfectly. This hub uses the # L68149 inner bearing and # L44649 outer bearing, is designed for 3,500 pound axles, and the bearings, races, and seal are included.

I have attached a short video review that you can check out as well.

If you happen to have a different bolt pattern or are unsure of what you have I have attached a great article below that explains how to quickly measure for this. I have also included a link that will take you to our selection of 3,500 pound hubs. Once on the page you can use the facets on the left side to toggle through different bolt patterns if needed.

expert reply by: Chris R