What Grease is Compatible w/ the Grease in Lippert Axles?

Question

Question:

I have Lippert 3500 lb dual trailer axles with ez lube hubs. What grease is compatible with the original lippert grease?

asked by: Michael M

0

Expert Reply:

Hey Michael! Lippert uses Lithium Complex grease on their axles. You will want to use a Lithium Complex grease like the LubriMatic LMX Industrial Strength Grease item # L11390.

expert reply by: Jerred H

0

Jerred H.

1/5/2026

Hey Michael, how did the Lithium Complex grease work out on your Lippert axles? Your update could make it easier for others trying to match the original Lippert grease.

Answer 1

Hello Jose, thanks for reaching out. Yes! We do have a suitable replacement for your old WFCO WF-8865 converter. I recommend the following: - Progressive Dynamics 9300 Series RV Converter Charger - 12V - 60A #PD79RR This will work with Lithium…

view full answer...

Answer 2

The Go Power Overlander Expansion Kit - 200 Watt Solar Panel item #34282182 has everything you need to connect to your existing Go Power Kit with the exception of extension cables. I have listed the lengths available below: 10' Go Power MC4…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

Hey Michael, for wet bolts you could use the part #126B2 and then for bronze bushings part #D014-077-00 but we do not have any brass bushings in the size you need. How many miles do you have on the Road Armor equalizers you think?

view full answer...

Answer 5

Hey Viencent, thanks for the information! To replace the bushings in your slipper springs, I recommend the Dexter Bronze Bushings item #K71-291-00. These have a 11/16" outer diameter and will replace all four of the bushings on your car hauler.…

view full answer...

Answer 6

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 will not include wet bolts. This is due to the system using slipper springs to replace the double eye springs that come on most trailers. With the slipper springs…

view full answer...

Answer 7

Hi Justin; do the leaf springs run under your axle (underslung) or are they sitting on top of the axle (overslung)? If you have the underslung configuration you can use the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 you were looking…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Howard! Yes, I think the Replacement Inner Member for Dexter DX7.5L Brake Actuator #DX97FR will replace what you have. It has the same body, just a different coupler on the end, so it will line up in the old housing. If you want to save some…

view full answer...

Answer 10

Yes. The way that a breakaway switch such as #HM20010 works is that the pin inside holds two pieces of metal apart. Once pulled out it allows the 2 pieces of metal to touch completing the circuit between the breakaway battery and the trailer brakes.…

view full answer...

Answer 11

I went out to our warehouse and pulled the Bulldog Collar-Lok Coupler w/ High-Profile Latch, #BD028384 to get a measurement for you. The neck of the Bulldog coupler measures 8". I have included pictures which illustrate these measurements. The…

view full answer...

Answer 12

According to Lippert they use Lithium Complex grease on their 2k-7k axles. This means you can use a Lithium Complex grease like the LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge #L11390 for your bearings.

view full answer...

What Grease is Compatible w/ the Grease in Lippert Axles?

Product Page this Question was Asked From

Continue Researching