Where Is the Rear Threshold Plate On a 2017 Dodge Challenger When Installing T-One Harness 118656

Updated 07/02/2019 | Published 07/01/2019

Products Featured in This Question

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(21)

$62.50

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(30)

$67.94

Question:

Can/will you help me identify the Rear Threshold Panel RTP which needs to be removed? Ive googled it to try to find an image of the part. Dodge Challenger RTP by itself does not help. A picture or image or a physical description would be helpful.

asked by: Arthur N

Expert Reply:

The rear threshold plate as Tekonsha calls it or the rear scuff panel as Curt calls it can be found in the attached photo. I have also attached for you two sets of instructions, one for the Curt T-Connector Vehicle Wiring Harness part # C56230 and one for the Tekonsha T-One Vehicle Wiring Harness part # 118656. These are different harnesses yes but they install in the same place which means the process will be the same. I recommend you take at the instructions for the Curt T-Connector even if you have the Tekonsha T-One as they are much more detailed.

expert reply by: Conner L