Correct Replacement Bearings and Seals for 2006 EZ Loader Boat Trailer With 3,500 Lb Oil Bath Axle

Updated 07/01/2019 | Published 06/29/2019

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2953)

$15.39

Double Lip Seal for 3,700-lb Marine Hubs

(190)

$18.03

Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)

(1609)

$38.45

Question:

I have a 2006 ez loader trailer VIN# 1zerasmu36a019462. Looking for replacement bearings and seals - this is an oil bath hub. Thank you

asked by: Travis

Expert Reply:

I spoke with EZ Loader about your trailer and they told me that you have an #84 spindle which means you can use the Bearing Kit for #84 Spindles part # BK2-100 to replace the bearings and races. However, the oil seal that you need is going to be a little bit harder to come by as manufactures just don't make oil seals for these smaller axles anymore. Therefore, the only option I have for you is to covert to grease, the Double Lip Seal for 3,700-lb Marine Hubs part # 168255TB is what you need. The other option you have is to just reuse the oil seal you have now if in good condition.

If you let me know the hub bore on your trailer hub then I can get you the correct grease cap or Bearing Buddy Bearing Protector if you want like part # BB1980A-SS.

expert reply by: Conner L