Can Different Brand of Shank Be Used with Equal-i-zer Weight Distribution Hitch

Updated 06/12/2019 | Published 06/11/2019

Products Featured in This Question

Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW

(843)

$620.53

1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel

(282)

$19.37

Thin Walled Socket for Equal-i-zer Hitches

(100)

$68.63

Question:

I currently have a reese round bar wd hitch. I am thinking of getting the equilzer hitch without the shank, if my current shank will work. I wasnt sure if equalizer had a special shank.

asked by: David O

Expert Reply:

Yes, you can use your existing Reese or Pro Series weight distribution shank with any other brand of weight distribution system such as the Equal-i-zer # EQ37101ET since these parts are standardized for hole size and spacing. This Equal-i-zer system works for loaded trailer tongue weight from 600- to 1000-lbs (including the weight of any cargo that sits behind the tow vehicle's rear axle).

All you might want to add is a thin-walled socket for installing the hitch ball. We offer Powerbuilt part # ALL643216 and Equal-i-zer part # EQ70-00-4800.

expert reply by: Adam R