Step Recommendation to Replace Running Boards on 1994 Dodge Ram Roadtrek Conversion Van

Question

Question:

I am looking for replacement running boards for a 1994 Dodge Ram Roadtrek conversion van. Or, if u could recommend a step that would work considering the limited mounting options under due to the holding tank.

asked by: Tony W

0

Expert Reply:

There is not a custom fit running board fit for your 1994 Dodge Ram Roadtrek Conversion Van. My recommendation is to use a wider step like the Carr Custom-Fit Side Step - Super Hoop - Black Powder Coated Aluminum - 17" Step - Qty 1 # CARR124031-1. These are the only style I can see based on my research that are a fit. I checked around and none of our manufacturers have a direct fit running board for your van so that is the route I'd go.

expert reply by: Jason S

0

click to enlarge

Answer 1

We actually do have something that can help your somewhat larger uncle (please don't tell him I said that as I don't want a 7 foot, 400 lb man coming after me!) get on your 2001 Dodge Ram quad cab, though the nerf bars you referenced…

view full answer...

Answer 2

Hey Josh, so we can help but we don't have any custom fit gooseneck hitches that fit your 1976 Ford F-250. Best option would be a universal style option like the Curt plate part #C65500 which would need to get welded to the top of the truck frame…

view full answer...

Answer 3

Hello Frank, thanks for reaching out. Sounds like typical Ford for you lol. We do have a plug-in brake controller option for the 2025 Ford F-250. For that I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED67CR since it…

view full answer...

Answer 4

The Carr Custom-Fit Side Steps - Hoop II - Black Powder Coated Aluminum - 7" Step - 1 Pair #CARR103991 have a measurement of 1.9 inches vertically and 8.5 inches horizontally measuring hole center on center. I've attached a photo to assist.

view full answer...

Answer 5

We do offer cab steps that are designed to fit your 2012 Silverado Crew Cab. The steps we offer are manufactured by Carr. Bully does not offer cab steps for your truck. I have attached a link to our product page for the cab steps we offer. The Carr…

view full answer...

Answer 6

Basically the difference between the two CARR steps you have part numbers #CARR125771 and #CARR105771 is the length of the step. The mounting brackets are the same. The CARR125771 is 17 inches long and the CARR105771 is 7 inches long. We do offer a…

view full answer...

Answer 7

Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Daniel, thanks for reaching out. The torque value for the lug nuts depends on the wheel type, size and stud size. The #KE94WV wheel is a 15" steel wheel and uses 1/2" studs, so the recommended torque spec is 90-120 ft-lbs. I've…

view full answer...

Step Recommendation to Replace Running Boards on 1994 Dodge Ram Roadtrek Conversion Van

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching