Mounting Hole Dimensions Of Carr Hoop Step # CARR103991

Question

Question:

question about carr103991. I need the distance between bolt holes onleft side to right side.

asked by: Joellekarelli

0

Expert Reply:

The Carr Custom-Fit Side Steps - Hoop II - Black Powder Coated Aluminum - 7" Step - 1 Pair # CARR103991 have a measurement of 1.9 inches vertically and 8.5 inches horizontally measuring hole center on center. I've attached a photo to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

We do offer cab steps that are designed to fit your 2012 Silverado Crew Cab. The steps we offer are manufactured by Carr. Bully does not offer cab steps for your truck. I have attached a link to our product page for the cab steps we offer. The Carr…

view full answer...

Answer 2

Thanks for reaching out, Mike. The only noise you should hear from any of the Power Watchdog Surge Protectors would be a small audible click when the unit energizes or disconnects power. This includes both the Portable Power Watchdog #HU62VR and the…

view full answer...

Answer 3

Hey Chris! Yes, PowerMax converters like the #PM34VR 45 amp, #PM94VR 55 amp, #PM44VR 60 amp, and #PM84VR 100 amp can supply 12V DC power to your system even if a battery isn’t connected. When plugged into shore power, they’ll convert AC power to 12V…

view full answer...

Answer 4

Yes the Curt base plate kit part #C64ER that you referenced is compatible with the Blue Ox tow bar part #BX7380 that you referenced.

view full answer...

Answer 5

Hey Chris, a good place to start with would be what is the amp rating of the current battery you have and then decide if that was adequate or not and go with a similar or higher rated lithium battery. The Rich Solar Alpha part #RS74VR that you…

view full answer...

Answer 6

Hey Henrick, yes I can help you out with finding a good solar panel for the Rich Solar Alpha 1 Pro Lithium Battery #RS74VR. First let's do some quick math based on your electronics: A 12V fridge (60W × 10 hours) = 600Wh LED lights, fan,…

view full answer...

Answer 7

Hey Scott, since your 2018 Toyota Tundra Crewmax has a bed length of 5-1/2 feet the automatic slider fifth wheel hitch kit you would need would be the Demco Hijacker part #DM28XV which comes with the correct rail kit for your truck as well. This…

view full answer...

Answer 8

A trailer can bounce if there is not enough weight on it. You see this particularly with utility trailers that are empty. The tire and wheel size would not automatically cause a trailer to bounce though usually you see smaller tires on smaller…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Mounting Hole Dimensions Of Carr Hoop Step # CARR103991

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching