Is the Rhino-Rack Sunseeker Awning Compatible with Yakima JetStream Crossbars

Question

Question:

Will this fit on Yakima jetstream crossbars?

asked by: Aaron I

0

Expert Reply:

Yes, the Rhino-Rack Sunseeker Awning # RR32133 comes with bolts that fit in the T-Slots on Yakima JetStream crossbars so they are compatible with each other.

I have attached a review video of this for you to check out as well as the installation instructions for you to reference.

expert reply by: Jon G

0

Answer 1

That's an interesting question, though you will need to utilize the top channels of your Yakima JetStream crossbars in order to mount the Rhino-Rack Sunseeker Awning #RR32132. The reason is, the bottom channel on the JetStream crossbars…

view full answer...

Answer 2

The Rhino-Rack Sunseeker Awnings like part #RR32132 and part #RR32133 are a bolt on design that will attach to crossbars or roof racks that have the t slots in them using the provided brackets. While it may be possible to drill holes in your bars to…

view full answer...

Answer 3

Hello Kris. Great question. First you are going to have to determine what style roof you have on your 2023 Toyota Highlander, do you have the flush mounted rails or the naked roof? I am attaching a picture so you can determine the difference. -For…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Howard! I would be happy to compare these hitches for your 2019 Toyota Highlander. The Curt #C13200 and etrailer #e98844 share the same design so the only difference is the finish. I prefer the matte black finish on our hitch since it does a…

view full answer...

Answer 11

Hi Steve! There are two options that will help the sag you are getting in your 2021 Honda Pilot when you are towing. The first is the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1125F. We have these listed as being for the…

view full answer...

Is the Rhino-Rack Sunseeker Awning Compatible with Yakima JetStream Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching