Replacement Bearings, Races and Grease Seals Old 6 Lug Utility Trailer Hubs
Updated 05/01/2019 | Published 04/30/2019
Products Featured in This Question
Question:
bearings races and seals x2 for old 6 Lug utility homemade trailer I read an answer to someone elses problem looks just like mine. I need Inner, outer bearings and races and seals for a 2 wheel trailer. I have 2 Timken 1779 outer bearings and races, 2 Timken 2788 Inner bearings and races, and 2 seals. Your answer to the other person mentioned a seal #29031. The # on my seal is ?? 25814-002. Guessing at some #s. The measurements for seal: Diameter of axle for seal 1 7/8+ Outside diameter of seal 3. My caliper is manual so this is the best I can do. HELP!
asked by: Terry L
Expert Reply:
I couldn't find that seal number for a cross-reference. Based on your manual caliper measurements the Grease Seal # 29031 is a perfect fit. Then you will use the bearing # 2788 and # 1779. If you need the replacement races for these then # 1729 and # 2729 are what you need.
I recommend using the 7-Piece Installation Set for Bearings, Races, and Seals # PTW83020 to make removal of your current races and installing the new ones easier.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.88 Inch I.D.
- 3.00 Inch O.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bearing 2788 trailer bearings races seals caps
- Search Results: trailer bearings races seals caps
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Video: The Low-Down on the Grease Seal 29031
- Q&A: Replacement Bearings 2788 and 1779
- Q&A: Replacement 1779 and 2788 Bearings and National 5970 Seal
- Q&A: Availability of Replacement Bearings, Races, and Seal # 1779, # 1729, # 2788, # 2729, # 29031
- Q&A: Availability of Trailer Hub Using Timken # 2788 Inner Bearing and Timken # 1779 Outer Bearing
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Shop: Oil Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal 29031
- Shop: Timken Replacement Trailer Wheel Bearing - LM29749
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Possible Replacement for Trostel 300-156-6 Seal
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How Much Does a Boat and Trailer Weigh?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide