Replacement Disc Brake Pads for 2006 MasterCraft Tandem Trailer

Question

Question:

Need brake pads

asked by: Steve T

0

Expert Reply:

From my research it appears MasterCraft specifies Kodiak disc brakes on their tandem boat trailers so you'll just want to confirm the axle rating. Then just review the linked page that displays all Kodiak replacement pads like the part # K225CP that you referenced. Since these pads work for 3500- to 6000-lb brake assemblies they are most likely the ones you need. Each kit includes parts for one axle. We also have upgraded pads # K225CPSS with a stainless steel backing plate for superior corrosion resistance.

expert reply by: Adam R

0

Answer 1

The first thing we need to know is what kind of brakes you have on your trailer. For brakes you need to let me know what size and type brakes you have on your trailer. I have attached a couple helpful articles that explains what is needed when adding…

view full answer...

Answer 2

Hey Dennis, thanks for the dimensions of your grease seal. Based on that the correct replacement would be the part #010-180-00.

view full answer...

Answer 3

While we do have replacement jacks that will work for your 1996 Mastercraft Prostar 190 trailer, there are none that are going to be a direct bolt-on replacement for the bracket you currently have on. So what you will need to do is use a bolt-on jack…

view full answer...

Answer 4

The best way to find the bearing numbers of your trailer is to pull the hubs and read the numbers on the current ones or measure the spindles where the bearings sit. You may be able to find a tag or stamp on the axles and use it to find information…

view full answer...

Answer 5

The standard ratio we use for selecting a boat trailer winch is 2:1 which means the winch at a minimum needs to be rated for half the weigh of the boat. The Fulton 2-Speed Trailer Winch part #F142425 is a great option with enclosed housing and…

view full answer...

Answer 6

The lower hitch opening of the Curt Dual 2" Receiver Tube Adapter, 8" Extension #D-192 that you referenced can be used for flat towing and towing trailers like you are interested in doing. You should note that this has a capacity of 350 lbs…

view full answer...

Answer 7

To determine the correct Hub and Rotor for your 2003 Mastercraft single axle boat trailer you will need to determine what the inner and outer bearing part numbers are inside the hub, the brake mounting flange bolt pattern and the correct bolt pattern…

view full answer...

Answer 8

It sounds like you may be wanting to replace just the coupler portion of the actuator. Typically the best option for a surge brake actuator with a bad coupler, is to replace the entire actuator. To replace just the coupler, I would need to know the…

view full answer...

Answer 9

Unfortunately, we don't offer a jack that would be compatible with your existing weld-on bracket. Atwood went out of business awhile back and their products are no longer available. I'd recommend having the existing bracket removed and…

view full answer...

Answer 10

It sounds like you're using our system to look up both the tire and wheels as opposed to just wheels. Your ST215/75R14 tires will install on 14" wheels and out of our linked selection I recommend checking out the Aluminum Sendel Series T07…

view full answer...

Answer 11

From the research I did the Kodiak 225 calipers like the part #KDBC225DAC that you referenced are an exact replacement for the Mastercraft setup you currently have.

view full answer...

Answer 12

I can help you get there, but we do not have a database of each part that is on each year, make and model of trailer so there would be no way for me to tell you outright the specific part number you need. What I can do is tell you what you need to…

view full answer...

Replacement Disc Brake Pads for 2006 MasterCraft Tandem Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching