bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Two Wire
Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug
Optronics

Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug

Part Number: A49PB
In Stock
$6.75
Retail:$8.98
You Save: 25%
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights. 1-800-940-8924 to order Optronics accessories and parts part number A49PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (105)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A49PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Optronics
  • Two Wire
  • 10 Inch Long
  • Right Angle Pigtail

This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights.


Features:

  • Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics backup and utility lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 2-prong PL-3 molded plastic plug connects to back of trailer light
  • 2-Wire pigtail
    • White wire for ground
    • Red wire for power
  • #10 Ring terminal on ground wire
  • Approximate wire length: 10"


Optronics A49PB Right Angle 2-Wire Pigtail Dimensions

Pigtail is a direct replacement for:

  • Uni Bond PT6020
  • Truck Lite 94992
  • Grote 67010
  • Peterson 421-49


A49PB Optronics Right Angle 2-Wire Pigtail for Trailer Back Up and Utility Lights - 2-Pin PL-3 Plug

Alternate part number: A-49PB




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

105 reviews
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for backup and utility lights.

by:

Right angle plug was a perfect fit. Arrived when it was scheduled. Great follow up customer service. I'll do business again with etrailer!



by:

Ordered Monday, delivered on Wednesday. Did install today. Lights look in the garage, lake test Monday before sunrise.
Same brand as tail/stop lights on my trailer. Same quality look.

Dean L. profile picture

Dean L.

4/15/2024

Very pleased with the output on unimproved ramps. Plenty of light to back down safely in pre dawn conditions. Absolutely recommand as an upgrade in your trailer.



by:

Easy to use



by:

I recently purchased all new LED lights for a 28 year old Ranger Boat trailer I own. I had to add a 5th blue wire for the back up lights along with a new 5 wire plug. Everything came from etrailer and was an amazing, easy conversion from the old to the new. My new tail lights are amazing with the built in back up lights! Nothing but compliments from people who have seen them.
Your company was a pleasure to work with. You have a customer for life! Thank You!



by:

Great, Good quality, plenty of wire to work with.



by:

Recently it was time to replace/ upgrade my boat trailer rear lights. I found exactly what I was looking for at etrailer. The parts I ordered were well described and fit exactly right for my application. I also ordered the wire pigtail connectors as I was adding lights with an integrated backup lamp. Installation was a breeze and all the parts seem to be high quality. I will definitely buy more items of etrailer in the future. Thanks for the parts.



by:

I was able to replace my existing lights with these that include the back-up light feature. Exact fit and work better than expected. Now I can see behind my 5th wheel when backing up the rig. The light harness along with the light fixture more than met all my expectations.



by:

I am greatly impressed with the quality and durability of this connector. It's sturdiness has already been tested and it passed beyond its oem predecessor!!

Jon C. profile picture

Jon C.

7/20/2017

Its still attached to the trailer thus making it great product. The oem part failed which is why I needed a new one.



by:

Product worked exactly as described... made for an easy conversion of my original LED tail lights to upgraded models that feature integrated backup lights.



by:

These were a great option for the limited space available on my trailer. I find myself pulling my trailer at night frequently, and I'm not sure how I made it so long without reverse lights.



by:

Worked great! Need it to install GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes - Oval - Clear Lens - BUL111CB



by:

while shipping was on the slow side the item Ipurchased was exactly the right fit and was of excellent quality at a great price.I highly recommend etrailer if shipping time is not an issue,their prices are good and the parts are of good quality.



by:

Excellent fit, high quality, and already dielectric greased!



by:

After a year of using these in the saltwater as backup lights for my boat trailer they are still going strong



by:

Had to buy these when adding reverse lights to back of utility trailer. They work well in the led lights.
Easy to install and of good quality. No complaints.



by:

Excellent service and attention to detail. I would highly recommend purchasing from etrailer. Prices are great and they have a wide selection of information that helps with the purchase decision. Very impressed.



by:

I made this purchase for my son's boat trailer. I ordered on the Monday before Thanksgiving and it arrived the day before. Everything arrived as expected and well packed.



by:

Not sure why these didn't come with the lights I purchase. :(:(



by:

Good plug. Have bought several. etrailer.com ships same day and they are great people to do business with.



by:

I suggest using part of a pool noodle to ensure the connection stays tight, in the enclosier.
I used this in pole lights on a boat and they did rattle free , before I used the noodle mod.



by:

Great product would buy again also highly recommend buying from e trailer fast shipping got what I ordered in 2 days



by:

It's the correct pigtail for the lights they sell, what more can be said?



by:

Simple part. Fit the optronics lights that we have well.



by:

Standard 2 wire light plug, works well



by:

A exact replacement and good product.


25
105
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • Rewiring Boat Trailer for 7-Way to Use LED Lights
    There are a number of things you will need if you want to re-wire your boat trailer to use LED lights and you should start with Junction Box # 3375601100 and 7-Way # HM20041. Keep in mind you will also need Ring Terminals # 44-5310A and Loom Clamps # A0500 For LED lights I highly recommend checking out the LED Trailer Tail Light # STL57RB (Driver's side) and # STL56RB (Passenger's side). These are submersible lights with a total of 40 diodes and have mounting holes that are 2" center to...
    view full answer...
    Image 1 for
  • LED Reverse Light Recommendation for 2005 Toyota Prius
    Since you have a Prius I would strongly recommend going with an LED reverse light that will draw considerably less than the Halogen part # PL-807. For that you'd want the LED light part # BUL10CB with the bracket # BK70BB and the grommet # A70GB and you'd have a setup that draws only .28 of an amp per light. You'll also need a wiring pigtail like the part # A49PB. This could be ran to the reverse light circuit of your vehicle without overdrawing it.
    view full answer...
  • Looking for Way to Mount Optronics Backup Light # BUL10CB on Ranger Trail Boat Trailer
    In order to mount the Optronics Backup Light, # BUL10CB, on your Ranger Trail Boat Trailer, I recommend using the Rubber Grommet, # a70gb, and Trailer Light Mounting Bracket, # BK70BB. A wiring harness, part # A49PB for a right angle plug and part # A45CB for a straight plug, will also be needed for the Optronics Backup Light, # BUL10CB. I have included a few short videos for you to check out.
    view full answer...
  • Replacement Boat Trailer Reverse Light for a Wesbar 203206
    Hey John, thanks for reaching out! The Wesbar 203206 has been discontinued and there isn't a direct replacement, but I have an alternative that will get the job done, you might just need to modify the cutout space a bit. The Optronics Backup Light # BU33CB is the closest thing I could find to what you have on your boat trailer. You're going to need the Grommet # A33GB as well as a 2-Wire Pigtail # A49PB to get everything installed. The light has 3 prongs, but only 2 are needed for your...
    view full answer...
  • Brightness and Installation of the Optronics LED Backup Light # BUL22CB on a Boat Trailer
    I have attached a video demonstrating the brightness of the Optronics LED Backup Light, # BUL22CB, for you to check out. This light is waterproof and will work well on your boat trailer as a reverse light. Along with this light, you will want the Two Wire Pigtail, # A49PB. The end of this plug is molded rubber that, along with dialectic grease, will help seal the plug from water and moisture. To attach this light to your trailer, you will need the grommet, # A70gb. If you will not be...
    view full answer...
  • Recommended 6 Inch Oval LED Backup Light For Brightness
    We have 6-1/2 inch oval LED lights that are very bright, that are typically referred to as 6 inch lights in the trailer industry. I recommend the Optronics GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes, # BUL111CB, because it is a very bright replacement light that that meets the DOT compliant standards. They have a very clean look and are sonically sealed so they can handle all the weather thrown at them. They require a recessed mount # a70gb, and a 2-prong...
    view full answer...
  • Parts Needed to Add Back Up Lights & 7-Way Connector on Boat Trailer
    We can get you set up to add back up lights and a 7-way to your boat trailer, and I'll go over what you'll need. Let's start with the back up lights, and for your boat trailer you'll want submersible lights like you said, the GloLight LED Backup Light for Truck or Trailer - Submersible # BUL111CFPG. This will use a 2-wire (power and ground) pigtail, either the Right Angle 2-Wire Pigtail # A49PB or 2-Wire Pigtail # A45CB. Then for added wire I recommend 16 Gauge # 16-1-1, which is sold...
    view full answer...
  • Brighter Trailer Tail Lights to Replace Bargman 92 Series Tail Lights
    There are brighter lights available for your current Bargman 92 Series lights, but none that have a reverse light function. So to replace your current lights with brighter LEDs you will need the LED Trailer Tail Light - Driver's Side # 328-003-81LM1 and LED Trailer Tail Light - Passenger Side # 328-003-81M1. That's the closest available for your mounting width, and I have added a link to a video install for you to check out. Additionally, you could just add separate reverse lights if...
    view full answer...
    Image 1 for
  • Comparing Brightness Ratings of Optronics LED Tail Lights
    The Optronics LED Backup Light # BUL22CB is brighter than backup light # BUL10CB although I would not describe it as significant, though that can be subjective. Optronics measures the brightness of their lights using candelas and the # BUL10CB has a candela rating of 125, while the # BUL22CB has a candela rating of 160. There is also the backup light # BUL52CB which has a candela rating of 175. The reason I would not classify the brightness as significantly higher is because these lights...
    view full answer...
  • Replacement LED Marker Lights for Floe Pro 100 14 Foot Snowmobile Trailer
    From all the photos I saw online, it looks like Floe used grommet mounted 2-1/2 inch marker lights and standard 6-1/2 by 2-1/2 inch oblong taillights. If that's the case, for the amber 2-1/2 inch I would recommend # MCL59AB and # MCL59RB for the red marker light. The lamps use a standard # A55GB grommet to mount. The grommet is a fit for a 3 inch diameter rough opening. The lamps are designed to be used with a 2 pin pigtail like part # A49PB. I wasn't able to find a photo showing the...
    view full answer...
  • Do Trailer Reverse Lights Require Two or Three Wires to be Powered
    Reverse lights like the part # STL211RCB only need power and ground to function. You would not need three wires ran to the light assembly. Power would need to come from the reverse light circuit of the tow vehicle but you can ground the lights to the trailer frame or using wire to run back to ground of the trailer wiring. The version of the light I would recommend instead though is the part # BUL10CB since this is just a reverse light. For pigtail harnesses you'd want either the # A45CB...
    view full answer...
  • How Much Amperage Is Required to Add Reverse Lights to Trailer
    If the tow vehicle has a trailer reverse light circuit separate for trailer wiring then you'd be limited by the amperage rating of the fuse that protects it. If you are tapping into the reverse light circuit of your vehicle for the light then it comes down to the amperage rating of the fuse that protects the circuit as well as the amperage rating of the lights and how many amps are left over between those two numbers. Now with that all said if you went with an LED reverse light like the...
    view full answer...
  • Oval LED Reverse Lights with Grommet for Flatbed Trailer
    We have exactly what you are looking for in terms of an LED reverse light that fits with a grommet for your flatbed trailer. The Optronics LED Backup Light for Truck or Trailer - 6 Diodes # BUL12CB or the same light with 10 Diodes # BUL10CB can be mounted to your trailer with PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB and you will just need a 2-wire pigtail for the lights. For this you can use 2-Wire Pigtail # A45CB or Right Angle 2-Wire Pigtail # A49PB. I have added links...
    view full answer...
    Image 1 for
  • Plugs Needed for the Fusion LED Trailer Tail Light # STL211RCB
    At first I thought that this light had 2 places for the 3 terminal plugs but if you check out the attached picture of the Fusion LED Trailer Tail Light # STL211RCB you can see that one plug has 3 prongs (for tail light functions) and one plug has 2 prongs (for reverse light function). If you are just needing standard plugs then you would use part # A45CB for the 2 prongs and part # A45PB for the 3 prongs. These are also available at right angles with parts # A49PB and # A47PB respectively.
    view full answer...
    Image 1 for
  • How Does Backup Light of Fusion LED Trailer Tail Light Work
    In order to utilize the backup light function of the Fusion LED Trailer Tail Light # STL211RB you will need to plug in a 2-Wire Pigtail, either part # A45CB or # A49PB for a right angle pigtail. You can see from the accompanying photo of the rear of this light that it has connections for both a 2-wire and 3-wire plug. This would need to be used along with the 3-Wire Pigtail # A45PB or # A47PB (right angle) which gives the light its tail light functions. I looked up your order from the...
    view full answer...
    Image 1 for
  • Brightest Round LED Backup Trailer Light
    The Light Guide LED Backup Light # BUL603CB you referenced is certainly a nice, bright LED backup light, but the brightest is the GloLight LED Backup Light for Truck or Trailer # BUL101CB, as you can see by the accompanying photo. This light requires Grommet # A45GB and Right Angle 2-Wire Pigtail # A49PB. This does come packaged together with the GloLight LED Backup Light w/ Grommet and Pigtail # BUL101CKB. I have added links to video reviews for you as well which I highly recommend...
    view full answer...
    Image 1 for
  • Brightest LED Backup Lights Available That Fit Oval Hole On Trailer
    The GloLight LED Backup Light for Truck or Trailer # BUL111CB that you mentioned is going to be your best option if you are looking for the brightest backup lights in the oval recessed mount style. This product does not offer specs for lumens; I did contact Optronics to verify. They did, however, confirm with me that this LED backup light is going to be the brightest one available. It has 22 diodes, which is more than any other light in this configuration/style. This is DOT compliant. The...
    view full answer...
  • Recommended Oval LED Lights and Brackets for Flat Bed
    For your flatbed setup, I recommend starting with the brackets # BK70BB. Then I recommend using the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb to hold the lights in the bracket. For the red led lights I recommend the Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens # STL72RB with wiring pigtail # A47PB. For the white led lights I recommend the LED Backup Light for Truck or Trailer - Submersible - 10 Diodes - Oval - Clear Lens - Qty...
    view full answer...
  • DOT Approved Trailer LED Reverse Light and an LED Interior Trailer Light
    Optronics light # BUL78CB is a utility light so it is not DOT approved to be used as anything other than that. For the interior of the trailer it will work fine, it doesn't have to be DOT approved since it isn't a tail, marker, reverse, brake, or turn signal light. It is about as tough as any other trailer light that you would find but I would not expose it to repeated impact from cargo. the lens or flange would eventually crack. If you are looking for a DOT approved reverse light with...
    view full answer...
  • Reverse or Utility Lights to See When Backing Up Cargo Trailer
    If your trailer has a 7-Way connector and the vehicle side has the center pin active when the vehicle is in reverse then you can install backup lights on the trailer and wire them to the center pin. You can use 2 of backup light # BUL12CB 2 of grommet # a70gb 2 of bracket # BK70BB And 2 of pigtail # A49PB If you do not have a 7-Way but just a 4-Way instead you could wire a utility light such as # TLL48FB in with the running light wire on the trailer and have the utility light run on a...
    view full answer...
  • Recommended Brightest Interior Utility Light Replacement
    The Miro-Flex LED Utility Light - 12 Diodes - Round - Clear Lens # OPT57FR would be a good choice for an interior replacement light for your trailer. Although the number of diodes does not necessarily indicate brightness, this has the most of any round utility light we have. The light measures 4-5/16" in diameter and is 2-3/8" deep. If you want to mount it flush you will also need the Rubber Grommet # A45GB. From what I have found it looks like the Peterson has a single wire installation....
    view full answer...
  • Oval LED Trailer Tail and Backup Light that Mounts with a Grommet
    The closest match would be # STL211RB. It doesn't have a clear lens or Glo feature though. The grommet for this light is # A70GB and you would need pigtails # A47PB and # A49PB to plug into the back of it.
    view full answer...
  • Recommended Miro-Flex Clearance Lights With Clear Lens For Trailer
    We do offer Miro-Flex lights with clear lens for your trailer, but none of the Miro-Flex lights we carry are round with clear lens. The lights I recommend with a clear lens are part # MCL-50CRK. These lights have 3 LED diodes and come with the plug and grommet needed to install. For a round 2 inch Miro-Flex light, we offer the amber light, part # MCL50AB and the red light, part # MCL50RB. To mount these lights you would need the rubber grommet, part # a54gb, and you would need either...
    view full answer...
  • Outside Diameter of 2 Inch Round Grommet
    The outside diameter of the 2" Round Grommet # A54GB you referenced is 2-3/4". This grommet is used with 2" round lights such as the GloLight LED # MCL155RB (Red) or GloLight LED # MCL155AB (Amber). You will also need a 2-wire pigtail to complete the installation of these lights; either # A46PB for a 6" lead or # A49PB for a 10" lead. I have added links to video reviews of these parts for you to check out.
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<