Breaking Down the CE Smith Roller Bunks for Boat Trailers Video

Hey James, yes the Caliber Marine Slides for Boat Trailer Bunks #CA76AJ would work just fine with a boat that weighs 1,600 lbs.

Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part #CE27710 installed. For a set of swivel…

Hey Lisa. The Tie Down Bunk Slicks item #TD39FR do not require carpet. You can attach them to the treated lumber directly. The Tie Down Bunk Slicks item #TD39FR come in a 8-pack and measure 17" long 1-3/4" wide. They're made of PVC and…

Hey Tom, welcome back! The Tie Down Bunk Slicks for Boat Trailer Bunks item #TD59FR do not have any weight limitations. These come in a pack of 10 and measure 16" long and 3" wide. They do not come in white but I have a set that does. For a…

Yes, you would want to use two sets of 4 foot roller bunks since your current bunks are 8 feet long. I would recommend you go with the Dutton-Lainson Boat Roller Bunks #DL21740. These roller bunks would have plenty of capacity and would be sized…

Hello Joe, thanks for reaching out. The Diode Dynamics SS3 Pro LED Pod Light w/ Bracket part #DDY73WR comes with two lights. You get U-brackets, hardware and pigtails for each light. What will you be using them for?

If you have adjustable brackets for the bunk boards then you could lower them down and mount the CE Smith Roller Bunks for Boat Trailers #CE27710 directly to them. If you don't have adjustable brackets then you would need to remove the bunk…

A couple sets of the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 will drastically help with getting your pontoon boat on and off the trailer smoothly and easily as there isn't any friction…

You could use roller bunks such as #DL21740 on a pontoon boat trailer. If the pontoons sit on carpeted bunks and support the boat then you would need to place rollers the whole length of each of the carpeted bunks. Set #DL21741 is rated higher at…

Bunk rollers like the #DL21754 you mentioned would be an excellent choice for PWC's that rest on the edges of the bunks, as most of them do. At 4 foot long, they'd probably offer plenty of support, but I'd recommend getting a set…

The Yates Wobble Roller #YR440R are black molded rubber with a chemically bonded zinc-chromate washer rather than a bushing. This allows the roller to pivot as well as roll. If you prefer to not have the excess movement you should consider replacing…

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…