Is an Adapter Needed to Use the Curt Pintle Hook # C45908 with 3 Receiver on a 2017 Ford F-250

Updated 04/12/2019 | Published 04/11/2019

Products Featured in This Question

Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs

(529)

$369.27

B&W Hitch Receiver Reducer Sleeve - 3" to 2-1/2"

(377)

$36.16

Curt Hitch Pin and Clip for 3" Hitches - 5/8" Diameter x 4-13/16" Span

(2932)

$7.57

Question:

Will this fit the 3 inch receiver or will I need an adapter to fit it in my truck?

asked by: Michael K

Expert Reply:

Since your 2017 Ford F-250 has a 3" trailer hitch receiver you will need an adapter to use the Curt Pintle Hook and 2-5/16" Hitch Ball # C45908 because it has a shank made to fit a 2-1/2" hitch receiver.

For your application I recommend the B&W Reducer Sleeve # BWRHXA2183 as it has a 5/8" diameter hole for the hitch pin which matches what comes with the Curt pintle hook. This will reduce the 3" inner dimensions of your receiver to the 2-1/2" that you need.The hitch pin and clip that comes with the Curt pintle hook has 3-3/16" of usable space. Since this was designed for a 2-1/2" receiver you will want to verify that 3-3/16" is enough space. If it isn't then you will need to use something longer like the Curt # C21506 which has 4-13/16" of usable space.

expert reply by: Jon G