How to Use 1-1/4 Inch Shank of Thule 938 Rak-N-Loc Classic in 2 Inch Hitch  

Since the Thule Rak N Lok has been out of production for quite a few years, Thule does not have any specs or information regarding replacement parts. That said, I will do my best to provide some helpful information or parts that may work. Erailer…

The screw needed with the 2 inch adapter part #853-7292 that you referenced is the part #853-5787-02.

The Thule Goalpost TH997 is not a bike rack but rather a hitch mounted load bar/extender. If you can send me a picture of your bike rack then I would be able to help you identify which model you have. However, I believe what you are referring to is…

The Replacement 2 inch Hitch Adapter, part #853-7489, you asked about is an adapter, that Thule says will fit TH9028, TH9029, TH9030, TH9031 and TH934XTR bike carriers. They have the threaded hole in the shank that aligns with the hole on the…

I checked with my contact at Thule and verified that the Thule replacement hitch bolt you are looking for is part #908-1240-54. It is a 12 x 40mm hex bolt with a property class of 8.8. It should be installed with M12 washer, #951-1224-54, and M12…

Thank you for the picture. It looks like you have the Thule Hitching Post Pro, part #TH934XTR. We have a replacement bolt for that, but the bolt you reference, part #915087031, is not it. The replacement bolt you need comes in the Replacement…

If you live in an area where it is currently cold (since this is February) then the issue is that the rubber strap like part #753-3535 are being difficult to stretch due to the cold. Try heating the rubber straps up a little by taking the bike rack…

Yes. The cable you're referring to on the Swagman Current Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount #S64678 is designed to secure the bikes to the rack. I've linked our review video of this rack and around…

When attaching a cable lock such as #e98891 to a trailer hitch you would run it through the safety chain loops that are on the sides of the receiver. You would still use the regular hitch pin or bolt to secure the carrier in the hitch. I have…

Yes the Thule Snug Tite Hitch Lock and Anti-Rattle Device part #THSTL2 can be used to replace your old inactive Thule bolt part #853-5019--02. They share the same thread size and pitch and will be plenty long enough to secure your rack.

It looks like you have an older Thule T2 Hitch Mount Bike Rack and the correct replacement hitch bolt/pin for this is the Thule Snug Tite Hitch Lock and Anti-Rattle Device part #THSTL2 for locking or Threaded Hitch Pin for Thule part #TH62RE for…

With the Thule Doubletrack TH990XT having a 1-1/4" shank that uses a 2" adapter, you will need the Replacement Threaded Pin for Thule #853-5917. However, if you wanted to upgrade this, you may want to check out the Thule Snug Tite Hitch…