Recommend Keel Roller Setup For 14 Foot Aluminum Boat
Updated 12/30/2011 | Published 12/29/2011
Products Featured in This Question
Question:
Could you let me know what product you might offer to support the keel/bow of 14foot aluminum boat. It sits on a 1980 Dilly trailer. I want to add roller to the 3inch square trailer tongue just before bow curves off trailer tongue. Need roller bracket, mount bolts and low profile centering roller. Thanks
asked by: Michael G
Expert Reply:
I would recommend using the Universal Roller Brackets, # MBSPB, this will mount near the front of the trailer. Then you can use the 8 Inch Keel Roller, # DL21712, and a 5/8 inch Steel Shaft like part # CE10727A that includes two pal nuts
You will need to measure your trailer to see if you have space to mount the brackets. You will need an 8 inch area that the brackets can be installed in and adjusted for the roller to contact the keel of the boat.
Product Page this Question was Asked From
Dutton-Lainson Y-Style Bow Stop for Boat Trailers - Rubber - 6-1/2" Span - 1/2" Shaft
- Boat Trailer Parts
- Guards and Pads
- Bow Stop
- Rubber
- Fits 1/2 Inch Shaft
- Dutton-Lainson
more information >
Continue Researching
- Video: Review of CE Smith Trailer Fenders - Black Plastic Single Axle With Steps Qty 1 - CE19504
- Video: Review of CE Smith Trailer Fenders - Black Plastic Single Axle With Steps Qty 2 - CE19504-2
- Q&A: How Does the CE Smith Single Axle Trailer Fender Attach to the Trailer?
- Q&A: Parts Needed to Install the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 12"
- Shop: Tie Down Plastic Fender for 13" to 15" Wheels - Black
- Shop: Safety Chain for MORryde Goosetech with Clevis Hooks - 87" Long - 26,000 lbs
- Video: Review of CE Smith Boat Trailer Parts - Roller Shaft Boat Trailer Rollers 11 x 5/8 Inch - CES98JR
- Video: Review of CE Smith Trailer Fenders - Black Plastic Single Axle Trailer Fender Qty 2 - CE19503-2
- Video: A Closer Look at the Buyers Products 3/8" x 42" Class 4 Trailer Safety Chain with 1 Clevis Hook
- Video: Review of CE Smith Single Axle Trailer Fender Mounting Brackets 1 Fender - CES54XR
- Video: Checking Out the CE Smith Keel Roller for Boat Trailers
- Shop: Roller Shaft with Cap Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 5/8"
- Shop: CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
- Shop: Roller Shaft with Cap Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8"
- Shop: CE Smith Roller Shaft for Boat Trailers - Zinc-Plated Steel - 11" x 5/8" - Qty 1
- Search Results: trailer bearings races seals caps
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Search Results: boat trailer parts
- Search Results: grease seal
- Search Results: l44649 / l44649 trailer hubs and drums
- Search Results: bearing l44649 and l68149 trailer bearings races seals caps
- Search Results: l44649 kit
- Search Results: bearing l44649
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
on Boat Trailer Parts
