Will the Air Lift Ultimate Air Bag AL84290 Replace a Air Lift 5000 Air Bag AL58437

Question

Question:

I was wondering if this would be acceptable replacement for an AL58437. I like the idea of having the internal jounce bumper.

asked by: Thomas P

0

Expert Reply:

I spoke to my contact at Air Lift and they informed me that the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System part # AL84290 will replace the Replacement Air Spring for Air Lift LoadLifter 5000 System AL58437 that you have now.

expert reply by: Conner L

0

Answer 1

The Air Lift system that fits your 2011 Coachmen Encounter and uses the 5810 air bag is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88240 which uses the Replacement Air Spring for Air Lift LoadLifter 5000…

view full answer...

Answer 2

I would be happy to clear up the confusion. The exclusive upper and lower roll plates could also be considered the mounting brackets. I have attached a picture of what Air Lift is describing as their exclusive upper and lower roll plates. The Air…

view full answer...

Answer 3

For your Air Lift kit part #AL57385 the correct replacement air spring is the part #AL84290.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Will the Air Lift Ultimate Air Bag AL84290 Replace a Air Lift 5000 Air Bag AL58437

Product Page this Question was Asked From

Continue Researching