Availability of Foam Pads for Thule Cascade Cargo Box

Question

Question:

Is it possible to buy the foam stickers for the cascade box separately? I’m purchasing replacement on/off brackets, and would like to buy new foam pads as well. Thanks.

asked by: Christian

0

Expert Reply:

The part number for just the foam pads of this kit is # TH05001. This comes with two larger and two smaller adhesive pads.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 4

I can certainly help you out. The hardware used on the Thule Adventurer is #TH04997 that you have referenced. There is a specific order in which all of the parts will go on the crossbars. I have included a picture that shows how all of the parts go…

view full answer...

Answer 5

Since the correct replacement mounting hardware kit for your Thule 650 Adventure Box is part #TH04997 and has mounting locations that are 4" apart on center unfortunately the discontinued EasySnap mounting kit wouldn't have worked for your…

view full answer...

Answer 6

I believe there were some changes in the Thule Mountaineer designation as the model continued to be released. The Thule Mountaineer TT or 669TT manufactured from 2005-2008 is the only version of the mountaineer to use the #TH04997. Technically this…

view full answer...

Answer 7

There were 2 different models of the Thule Cascade Cargo Box. You can open the lid and look at the white label to see which model you have. The hardware kits are specific to the model so you will want to make sure of the model number. If you have a…

view full answer...

Answer 8

Hello Kevin. The Thule Cascade Cargo Box has been discontinued for quite some time, so that specific knob is not available. What you can do it use the Replacement QM3 - Quick Mount Hardware #TH04997 which will completely replace the mounting hardware…

view full answer...

Answer 9

The original mounting hardware for the Thule Cascade XT is no longer available. A good alternative is the Thule Replacement Quick Mount Hardware #TH04997. This fits crossbars up to 1-9/16 tall x 3-3/4-inches wide. If you end up needing to drill new…

view full answer...

Answer 10

Hi Jeremy! For your older Thule Summit Cargo Box, you will want the Replacement QM3 - Quick Mount Hardware - for Adventurer Cargo Box #TH04997. Yes, it does say it's for an Adventurer Cargo Box, but we have found they used the same hardware as…

view full answer...

Availability of Foam Pads for Thule Cascade Cargo Box

Product Page this Question was Asked From

Continue Researching