Replacement Lock Cylinder for Thule Weekender Cargo Box

Question

Question:

Hi I have a thule weekender cargo box and have lost the keys and I can not read the number stamped on the lock

asked by: Lisa L

0

Expert Reply:

Since you do not know the number on the lock cylinder of your Thule Weekender Cargo Box and it is locked you will need to have a locksmith come and unlock the box or very carefully drill the core out.

After that you can replace the cylinders with the Thule One-Key System Lock Cylinders # TH450200.

expert reply by: Kyle S

0

click to enlarge

Answer 1

We have exactly what you need for your Thule Summit! Take a look at the: -Replacement QM3 - Quick Mount Hardware - for Adventurer Cargo Box #TH04997. Even though it does not say it's for a Summit cargo box, this is the same hardware that was…

view full answer...

Answer 2

I spoke with my contact at Thule regarding your older Thule Summit Ski/Cargo Box. He stated that this particular model cargo box measured 91 inches long, 13 inches tall, and 17 inches wide. Although a bit wider and just a tad shorter, the closest…

view full answer...

Answer 3

So you can add a replacement lock core to your Thule Weekender 627 cargo box, but the lock core does need to be unlocked to be able to use the universal master key and install new lock cores with the Thule One-Key System Lock Cylinders #TH450200. It…

view full answer...

Answer 4

Yes, a Thule Weekender cargo box can fit Thule aero crossbars.

view full answer...

Answer 5

Hi Carl; I'm sorry to say the plastic piece/lock housing for the Thule Weekender isn't an available replacement part. It isn't even listed on the old parts list in the Thule archives. You can try to get creative and rig up a different…

view full answer...

Answer 6

For the Replacement Mounting Hardware for Thule Weekender Cargo Box #1032802 the reinforcement plate will go on top of the crossbar (but under the box), while the Replacement Quick On/Off Bracket #TH04973 will go underneath it. The tie-down bracket…

view full answer...

Answer 7

According to Thule you can use the QM3 mounting hardware, #TH04997, for the Weekender cargo box. The crossbars on your 1998 Toyota 4Runner will need to be up to 3-5/8 inches wide. I have included a picture that shows how this hardware will install.

view full answer...

Answer 8

The replacement mounting hardware for a Thule Weekender is the part #1032802 that you referenced. This box was discontinued before the 2020 CR-V was released so it was never test fit but I can't see why it wouldn't fit.

view full answer...

Answer 9

I do have an option for you but there isn't any alternative mounting hardware specifically for the Thule Weekender Rooftop Cargo Box. That said, you should be able to retrofit another set like the Replacement Mounting Hardware for SportRack and…

view full answer...

Answer 10

The Thule Weekender has a minimum crossbar spread of 24-inches and a maximum of 36-inches. If the distance between the center of your front crossbar and the center of your rear crossbar is between 24 and 36 inches, then the Thule Weekender will fit…

view full answer...

Answer 11

You can use the QM3 mounting hardware #TH04997 for the Weekender rooftop cargo box. This will use the carriage bolts as you stated and will fit 4 inch on center holes. I've attached some photos and a video to assist.

view full answer...

Answer 12

Thank you for your purchase from etrailer of the Thule Overcast Awning #TH8002AW604. The minimum crossbar spread is 36 inches from center to center and that is for balance and weight bearing purposes. Technically it can be assembled and mounted at…

view full answer...

Replacement Lock Cylinder for Thule Weekender Cargo Box

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching