Recommended Lift kit for a 2017 Lance 1475 Travel Trailer with Torflex Axle  

For your single axle Lance 1475 travel trailer you will use either Torsion Lift Kit #K71-723-01 or kit #K71-707-01 depending on which Torflex axle you have. You can check the identification sticker on the axle beam to find the axle number. If you…

Your 2017 Lance 1475 has the Dexter #10 torsion axle. The lift kit for that axle is #K71-707-01 like you referenced and will give you a lift of 2-5/8 inches.

Based on my research your 2015 Lance 1575 Trailer Trailer is equipped with a Dexter #10 Torflex Axle for which the Lift Kit #K71-707-01 will work perfectly as long as it doesn't use 3 inch high profile brackets. You can verify the axle type by…

I may have a solution for you, however we do not currently have any standard Dexter axles available that feature the kind of spindle lift you are looking for. I instead recommend looking into an Axle-Less System from Timbren, which can eliminate the…

I do not advise you flipping the Torflex axle as that is not how it was designed to be used. Instead what you need is a lift kit for your axle. For single Torflex axle trailers we have 2 different lift kits, part #K71-723-01 for #9 Torflex axles and…

If you've already checked all your connections and power source then it leads me to believe you might be using first gen and 2nd gen equipment together. The WVOS43 is the first generation of the WiSight camera systems so if you were using this…

I have attached for you below the pairing procedure for the Voyager WiSight Wireless RV Backup Camera System part #ASA84YR. Please note, a mistake I have made in the past was applying power to the camera too soon, this cannot be done until the…

Your Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA84YR most likely is getting the correct amount of voltage to it causing the signal lose you've been experiencing. I recommend splicing in the PWM Filter #VGR64VR behind your camera to…

Your Lance 1475 a-frame single-axle travel trailer has a fairly long tongue area for the jack and propane tank and so one option for transporting your bikes is to use the Stromberg Carlson Bike Bunk #CC-275, which is one of the items you reviewed.…

The first thing you need is a hitch and the Curt #13703 is an adjustable width hitch that is going to work with your 2018 Lance travel trailer so long as it has a box frame, C-channel frame, or I-beam frame that is between 22" and 72". As…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…