How to Pick Out Replacement 4,000 lb Trailer Leaf Spring for Trailer
Published 03/07/2019 >
Question:
Need to replace travel trailer tandem axle leaf springs. In measuring eye to eye I get 26inch on one and 25 3/4inch on the other I assume because of the equalizer and the weight of the trailer is causing the difference. What size measurement would I use? With it being under load while measuring should I decrease length? They are 3500 axles but would like to increase leafs to a 4000 rating. Would the increase also slightly raise the trailer? Thanks
asked by: Jon
Expert Reply:
When measuring leaf springs you need to take the load off of the trailer so that the spring is not flexed at all to get an accurate measurement. Since typically old springs will stretch a bit you'll take that measurement and look for a replacement that's around 1/8 of an inch shorter with the correct axle capacity.
Most likely the best 4,000 lb leaf spring option we have is the part # e57SR which measures 25-1/4 inches. You should verify the length of your springs unloaded first though.
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 4000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Shop: MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Search Results: moryde x factor
- Search Results: trailer leaf springs
- Q&A: Replacement Upgraded Leaf Springs for 2018 Grand Design Imagine 2800BH
- Q&A: Replacement Hub/Drum, Brake Assemblies, and Leaf Spring for 3,500 lb Trailer Axle
- Q&A: 25-1/4 inch Leaf Spring Recommendation for Travel Trailer with Tandem Axles
- Q&A: Replacement 3,500 lbs Leaf Springs w/ a 25-3/4" Center Eye to Center Eye Measurement
- Q&A: Replacement Leaf Springs For A Tandem Axle Trailer With Flattened Leaf Springs
- Q&A: Would Upgrading From 3,500lb Leaf Springs To 4,000lb Springs Hurt Ride Quality
- Video: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers Feature Review
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde X-Factor Crossmember for Standard Frame Hangers Feature Review
- Video: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications Review
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Search Results: x~factor crossmember
- Q&A: Availability of 3,500 lb Axle Leaf Spring that is 25-1/4 inch
- Search Results: l68149 / l44649
- Search Results: dexter 4440558

