Can 4,000 lb Axle Leaf Springs be Used on a 3,500 lb Axle for a
Updated 03/05/2019 | Published 03/04/2019
Question:
Is it possible to use 2000lb leaf springs on a 3500lb axle. I have a 28’ CrossRoads Zinger 28BH and 1750lb spring bent at eyes
asked by: Grant C
Helpful Expert Reply:
Yes, you could use leaf springs for a 4,000 lb axle, like part # e57SR (rated for 2,000 lbs each), with a 3,500 lb axle but it will make your ride a bit more stiff. The only times that a leaf spring would become damaged is if it is overloaded or has a defect from the manufacturer.
Since overloading a trailer is actually a pretty common occurrence I recommend checking to make sure that you are within the weight capacity of your trailer. It is also important to note that even if you upgrade the leaf springs on your trailer to ones that have a higher capacity your weight rating does not increase as you are limited to your least rated component.
Attached is a trailer maintenance schedule that you can use as a guideline to ensure that everything is kept up to date on your CrossRoads Zinger.
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Search Results: trailer lights
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long - EMCO
- Search Results: lugnut
- Search Results: wheel nuts
- Search Results: 3500 lb axle and spring kits
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Search Results: shackle straps
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Search Results: morryde suspension upgrade kit
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Video: An In-Depth Look at the Fusion LED Combination Tail Light Bar for Trailers over 80" Wide
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Video: Feature Breakdown: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers
- Video: Review of Dexter Trailer Hubs and Drums - Idler Hub - 8-259-50
- Q&A: How To Choose The Correct Hanger Width For A Double Eye Leaf Spring
- Video: Detailed Breakdown of the Step Wet Bolt for 1-3/4" Double Eye Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Detailed Breakdown of the Optronics ThinLine LED Trailer Tail LIght
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: Can You Install Longer Shackle Straps on Single Axle Trailer for More Lift
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Q&A: How to Pick Out Correct Shackle Length for Trailer Suspension
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Q&A: Torque Specs for Attaching Leaf Springs
on Trailer Leaf Springs
