Difference Between Hollywood Racks Sport Rider SE # HR1400-FB and # HR1400Z-FB

Question

Question:

What are the differences between part# HR1400-FB and HR1400Z-FB? Thanks.

asked by: Corey T

0

Expert Reply:

Hollywood Racks basically just upgraded the old part number with the new # HR1400Z-FB by reinforcing parts of the rack to make it a bit stronger overall and made the mast square instead of round. Functionally it is the exact same rack but the capacity was increased from 45 lbs per bike to 50 lbs per bike.

expert reply by: Jameson C

0

Answer 1

UPDATE: Yes, the Saris SuperClamp EX4 is compatible with bikes that have fenders. I have a solution for you, but the Saris SuperClamp EX4 #SA4026F cannot be used with bikes with fenders; you'll instead need to use a bike rack that holds the bikes…

view full answer...

Answer 2

Curt decided not to design hitch #C13068 to account for those welded on pieces you referenced in order to maximize the size of the side hitch brackets. As to why they chose to go with a 5 bolt design I can't say. The Draw-Tite hitch #75270 sounds…

view full answer...

Answer 3

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 4

Wheel-mount bike racks like the Thule T2 Pro XTR #TH83JV aren't the best options for bikes with fenders for exactly the reason you mentioned. The ratcheting hooks would come down on the fender instead of the wheel which won't provide a secure…

view full answer...

Answer 5

The Yakima StageTwo Bike Rack for 2 Bikes #Y47VR would have enough capacity for your 60lb e-bikes, but it doesn't have a ramp and attaches to the front wheel, which would interfere with the fenders of your bikes. You could take them off like you…

view full answer...

Answer 6

Yes, it will! The Saris SuperClamp EX 2 #SA4025F is approved for bikes with fenders by Saris. The way this works is that the front ratcheting hook needs to be clamped down on the wheel itself at the end of the front fender and that will prevent sway…

view full answer...

Answer 7

The Saris SuperClamp HD #SAR44VR and SuperClamp EX #SA4025F bike racks aren't compatible with bikes that have fenders because the clamp hooks will damage the fenders. I took a look at our Q&A's and didn't see anything where we said…

view full answer...

Answer 8

The Thule T2 Pro XTR bike rack #TH83JV is designed to hold onto the tires of the bikes and not the frame so it would not be a good option for bikes with fenders or baskets. For a platform style bike rack that does have hooks that clamp down on the…

view full answer...

Answer 9

The Curt hitch part #C1275 and the Draw Tite part #36633 that both fit your 2019 Honda Odyssey are both great Class II hitch options. Neither would have the advantage in terms of visibility but we've found that the Curt hitches tend to have a…

view full answer...

Answer 10

Unfortunately, Thule doesn't offer an individual replacement wheel strap for their 9034XTR T2 Pro XTR bike rack which we sell as part #TH83JV. The only way to obtain a replacement strap is to purchase the replacement wheel holder assembly…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Difference Between Hollywood Racks Sport Rider SE # HR1400-FB and # HR1400Z-FB

Featured Help Information

Miscellaneous Media

Continue Researching