Dimensions for Buyers Products 2 Inch Trailer Hitch Receiver for GM Cutaway Chassis

Question

Question:

Can you send me a full schematic with measurements of this hitch. I have a 2013 Chevrolet 3500 cutaway with a Morgan box/body. I would like to be sure that the hitch will fit properly past the rear step before ordering. Thank you! re: #3371801102

asked by: James K

0

Expert Reply:

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis # 3371801102 measures 39 inches wide center to center. Then from edge of receiver tube to rear most hole 20-3/4 inches long. I've attached a photo with measurements to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

It's not designed to. The Curt Trailer Hitch item #C15312 is custom fit for 2001 - 2010 Sierra and Silverado 2500 and 3500s. The width of the bolt holes is the same as the item #3371801102 as you can see from the dimensional diagrams below.…

view full answer...

Answer 2

For your 2019 Chevy Express Van on the cutaway chassis I highly recommend the Buyers Products Class V Trailer Hitch #3371801102. This is confirmed to fit your particular van and features a robust towing capacity of 12,000 pounds, along with a tongue…

view full answer...

Answer 3

Buyers Products Class V hitch #3371801102 fits the cutaway cab and chassis version of the 2003 GMC Savana Van. For the cargo and passenger van version their Class V hitch #3371801100 is the correct fit. I am not sure which version of the base vehicle…

view full answer...

Answer 4

I spoke with Buyers Products and the Hitch #3371801102 will measure 9.25 inches from the top of the frame brackets to the absolute bottom of the receiver hitch. This is also designed to fit a 2014 to 2021 GMC Savana Van Cutaway Cab and Chassis as…

view full answer...

Answer 5

Your 2012 Express Shuttle Bus would be built on the cutaway chassis version of the 2012 Express Van so that means the correct hitch you'd need is the Buyers Products part #3371801102 which was made for this style of chassis. I attached a picture…

view full answer...

Answer 6

On the Buyers Products hitch, part #3371801102, the mounting holes are 38-3/8 inches across center on center. Then on each side starting with the hole that's towards the rear of the vehicle they measure 3-11/16 inches from the first to the center…

view full answer...

Answer 7

The Buyers Products 2" Hitch Receiver For GM Express/Savana #3371801100 is designed to fit the standard van chassis with an OEM rear bumper. The top of this hitch will be 2" below the bottom of the frame rails. The Buyers Products 2"…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Dimensions for Buyers Products 2 Inch Trailer Hitch Receiver for GM Cutaway Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching