What Bolts Are Used to Attach the Spar Hanger to the Thule T2 Classic 2

Question

Question:

Which bolts go with the replacement spar hangar?

asked by: Jospeh

0

Expert Reply:

The Replacement Bolt part # 853-5976 along with the Replacement Washer part # 951081654 are what you are going to need to install the Replacement Bottom Spar Hanger part # 753358402 on your Thule T2 Classic 2 Bike Platform Rack part # TH9044 or #TH9044-9046.

expert reply by: Conner L

0

Answer 1

We do have the replacement screws for the Thule T2 Pro XTR Bike Rack for 2 Bikes #TH83JV available. - Replacement Self Tapping Screw for Thule T2 Pro Platform Bike Racks #8528100001 - Replacement Button Head Screw for Thule T2 Pro Platform Bike Racks…

view full answer...

Answer 2

The hardware needed to install the Thule Replacement Backbone to the Thule T2 Platform Bike Carrier, part #TH916XTR, is (2) of the #956122159 lock washer, (2) of the #908-1240-54 bolt, and (2) of the #951-1224-54 flat washer. If you need the end cap…

view full answer...

Answer 3

The parts that you need for your Thule T2 Classic TH9044 are the following parts: - Replacement Top Spar Hanger for Thule T2 Classic Bike Platform Rack #853595202 - Replacement Bottom Spar Hanger for Thule T2 Classic Bike Platform Rack #753358402

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 9

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 10

Hey Adrian, you are on the right track for a hitch for your 2017 Subaru Outback Wagon. I would recommend the Curt part #C13410 as it has plenty of towing capacity, is mostly hidden, and the advantage it has over the Draw Tite is that we just have…

view full answer...

Answer 11

There are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part #e98847 and hidden like the etrailer Trailer Hitch Receiver part #e42TR. The visible hitch means you can see the cross…

view full answer...

Answer 12

For your 2011 Subaru Outback Wagon the best hitch for ground clearance is the Curt #C13410 which fits very tightly to the rear bumper of the vehicle but also doesn't have a crosstube that hangs below the bumper either which helps with ground…

view full answer...

What Bolts Are Used to Attach the Spar Hanger to the Thule T2 Classic 2

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching