Rough Opening Size Required for Electric RV Fireplace Installation

Question

Question:

Thanks for your response. The exact opening size for my fireplace is 231/2 inches high and 271/2 inches wide. Do you have a unit that will fit? Can be flat or curved glass front. Thanks

asked by: Ray S

0

Expert Reply:

We do have dimensions readily available on some of the fireplaces like the Greystone 26" Electric Fireplace with Crystals - Recessed Mount - Black # 324-000068. The rough opening is referred to at the cutout size which can be finished or rough. The cutout size for this unit is 26-1/4" wide x 5-3/8" deep x 20-1/2" tall with the overall dimensions of the unit being 28-3/8" wide x 5-1/2" deep x 21-3/8" tall..

If you have a specific fireplace you need the measurements for I'm happy to help.

expert reply by: Jason S

0

Ray

1/25/2019

Thanks for your response. The exact opening size for my fireplace is 231/2 inches high and 271/2 inches wide. Do you have a unit that will fit? Can be flat or curved glass front. Thanks

Jason S.

1/25/2019

Unfortunately we don't have anything that is an exact fit for your dimensions. My recommendation based on your dimensions is the Furrion 30" Electric Fireplace w/ Wood - Recessed Mount - Black # F30SW15ABL which will not require widening the opening but will require reducing the height of the opening so there will be a slight building up or reduction of height. Many people will use that as a décor accent opportunity, so that's the upside of not having a perfect fit.

Answer 1

The Grand Design Solitude 310GK has a 15,000 lbs GVWR with a pin weight of 2,350 lbs. Based on what I can find online from GMC website the truck if it is 2WD should be able to tow a 5th wheel trailer up to 15,400 lbs or if you have the 4x4 would be…

view full answer...

Answer 2

The lights per meter (LPM) figure you are referencing is the actual number of diodes in one meter or three foot section of the light strip. The Optronics Flexible LED Light Strip part #UCL90CB has 300 diodes and is 17' long therefore has an LPM…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 9

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 10

Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item #PB25RV. Lifting your truck by the frame will stretch the bags too far…

view full answer...

Answer 11

Congrats on the new camper, Steve! That's a really good question. Doe the width you want to go based off the cut out size. The new fireplace will most likely wont be the exact same size as the original one. The new fireplace will come with a…

view full answer...

Rough Opening Size Required for Electric RV Fireplace Installation

Featured Help Information

Miscellaneous Media

Continue Researching