Could Fulton Marine Jack # PSEA20000103 Fit 3 inch Trailer Frame

Updated 06/12/2024 | Published 01/01/2019

Question:

Does the Fulton 5,000 lb. trailer jack fit a 10,000 lb boat trailer neck that is 3 in. x 3 in.? Thanks, Tom It says in the description it fit 4, 5 or 6 inch. If it doesnt do you have a 5,000 jack that will work?

asked by: Thomas L

Expert Reply:

You could install the Fulton Marine Jack # HD50000101 on a trailer frame that measures 3 inches by 3 inches but you'd have to use 1 inch spacers as the smallest set of u-bolts that comes with this kit is for a 4 inch frame dimension.

expert reply by: Jameson C

Kane C.

6/12/2024

Jameson, I'm running into the same issue as Thomas L. Do you have a link or part number for the 1 inch spacers you recommend? Thanks

Jameson C.

6/12/2024

@KaneC I wish we did but that would be something you'd need to source. You could try calling a local welder in your area to see if they could make you something or you might have luck checking like at Home Depot.