Trailer Hitch and Bike Rack Recommendation for 2018 BMW X3

Question

Question:

I have an x3 m4, 2018. I’m looking for a hitch and bike rack. I was looking at Jason’s post with 2 pictures of x3’s. My bmw is identical to the one with the temporary license plate. Can you tell me which hitch is on that one, and also, if there are any material differences between the two hitches you recommend? For the bike rack, I’m wondering what you would recommend. I’d like to haul 2 bikes, sometimes road bikes and sometimes mtn. I’d like a rack that’s easy to remove and reinstall, but with a solid connection with minimal rattle/sway, etc. Thank you

asked by: Brad

0

Expert Reply:

I found the picture you mentioned. In it the BMW X3 has the Draw Tite part # 76226 installed.

For a bike rack I really like the Saris SuperClamp EX part # SA4025F.

This is a platform bike rack that only touches the bike at the tires and only weighs 35 lbs. The biggest drawback to platform bike racks has always been the weight of them, but with this rack you get the best of both worlds. The preferred attachment style with the lighter weight that makes for easy install/removal. Check out the review video I attached for more info as well. I also attached a test course video that shows how stable the rack is on the road too.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Of the hitches available for your X3, I recommend the Draw-Tite Class III hitch, part #76226. It's just a few dollars more expensive than the compatible Curt Class III, part #C13316, but the Draw-Tite model has a 750 lb tongue weight capacity,…

view full answer...

Answer 2

The Hidden Hitch by Draw-Tite Trailer Hitch Receiver part #DT56GR is very similar in design to the Draw-Tite Max-Frame Trailer Hitch Receiver part #76226. Therefore, you can use the install video I have attched for you for help with installation.…

view full answer...

Answer 3

You will still be able to use the hands free liftgate feature on your 2018 BMW X3 M40i with the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT56GR. We tested the hands free feature on a 2021 X3 with the similar Draw-Tite Max-Frame Trailer Hitch…

view full answer...

Answer 4

Yes, the Draw Tite hitch part #76226 that you referenced does fit your 2023 BMW X4. This only has the hitch opening that hangs below the rear bumper so it's mostly hidden as well.

view full answer...

Answer 5

I just spoke with my rep at Stealth Hitches to confirm. You're going to need the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item #SH62VR for your 2021 BMW X3 30e Hybrid. The Stealth Hitches trailer hitch includes everything you…

view full answer...

Answer 6

Honestly Ladd, not much. All of the hitches: the Curt #C13387, Draw-Tite #76226, and etrailer are basically the same size, weight (30 lbs), and have the same weight capacities. The only thing separating these hitches is going to be the actual brand…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Trailer Hitch and Bike Rack Recommendation for 2018 BMW X3

Featured Help Information

Miscellaneous Media

Continue Researching