Lid Lifter Hinge for Thule Ascent 1700 Rooftop Cargo Box

Question

Question:

Will this lifter fit a Thule Ascent 1700?

asked by: Jeff

0

Expert Reply:

The correct lid lifter hinge for your Thule Ascent rooftop cargo box # TH605 is part # TH14936. The part you referenced # 1401495200 is specifically for their Motion XT box models # TH629806 or # TH629807.

expert reply by: Adam R

0

Answer 1

I have a great solution for you. Unfortunately, I confirmed with Thule that the Replacement Lid Lifter Hinge for Thule Cargo Boxes #TH14936 is not compatible with the Thule Motion XT XL #TH629806. However, the part that you need is the Replacement…

view full answer...

Answer 2

According to Thule, the proper replacement lid lifter for the Thule Motion XXL cargo box is their part number 1500056463 which we carry as part #1401495600. Just to be sure, I've confirmed this with my Thule representative.

view full answer...

Answer 3

Hey Geoff, I spoke with Thule and they stated that the correct replacement lid lifter hinge for your Thule Force XT XXL cargo box would be part #TH93VA.

view full answer...

Answer 4

The serial number for your Thule Summit Cargo Box per Thule will be engraved underneath the lid near the front of the lid. We do not have any reverse mounting hardware that will enable the lid to open from any side besides the normal left side. I…

view full answer...

Answer 5

Thankfully, we do have the replacement parts you mentioned for the Thule Force XXL #TH6359B. Part "B" and part "D" from the attached specs picture are the following: - B: Replacement Thule AcuTight Cradle for Thule Roof Mounted…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Lid Lifter Hinge for Thule Ascent 1700 Rooftop Cargo Box

Products Featured in This Question

Continue Researching