How Large is the Hub Bore on the Trailer Hub and Drum Assembly AKHD-655-6-K
Updated 12/17/2018 | Published 12/16/2018
Products Featured in This Question
Question:
I know these brake drums are Lug Centric but what size Hub bore is the minimum required as I am looking at different wheel options
asked by: Corey
Expert Reply:
I went out to our warehouse and measured the Trailer Hub and Drum Assembly part # AKHD-655-6-K for you. The hub bore is 3.409" therefore that would be the minimum hub bore on your trailer wheels. Almost all of the trailer wheels we offer with a 6 on 5-1/2" lug pattern have a hub pilot hole sufficient for this. For example, the Dexstar Steel Mini Mod Trailer Wheel part # AM20746 has a 4.27" hub pilot hole.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Brake Assemblies for 2002 Cedar Creek
- Q&A: Does Maxxis ST235/80R16 Radial Tire w/ 16" Eagle Aluminum Wheel Come With Lug Nuts
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Replacement Electric Trailer Brake Assembly for Axletek Hub BD-655
- Q&A: Looking for Parts to Convert 3,500 lb Axle of Big Tex Trailer Axle to Having Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Trailer Wiring Diagrams