Hub and Drum for a Dexter 3,500 Lb Axle with 5 on 5 Inch Bolt Pattern

Published 11/21/2018

Products Featured in This Question

Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K

(1627)

$220.03

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5

(1072)

$129.85

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased

(1075)

$146.28

Question:

That’s for the quick response Here’s the serial # 151618078

asked by: Richard

Expert Reply:

The correct hub/drum for your Dexter 3,500 lb axle is more than likely going to be the Dexter Trailer Hub and Drum Assembly part # 84556UC3 or part # 84556UC3-EZ (E-Z Lube). The L68149/L44649 bearings and 10-19 grease seal that this kit uses is fairly standard for this axle. However, there are certain instances in which this is not the case. In order to be sure you can either give me the serial number off of the white tag on the axle or read me the bearing and seal numbers off the parts you have now. There is also a way to measure the spindle to determine this but at which point it would be best to find the serial number of the axle.

If need be I have attached the measuring help article for you but the Dexter Trailer Hub and Drum Assembly part # 84556UC3 or part # 84556UC3-EZ (E-Z Lube) should be correct and will work with the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469.

expert reply by: Conner L

Richard

11/21/2018

That’s for the quick response Here’s the serial # 151618078

Conner L.

11/21/2018

I just got off the phone with Dexter and can confirm that the Dexter Trailer Hub and Drum Assembly part # 84556UC3 or part # 84556UC3-EZ (E-Z Lube) is correct for your trailer.