Trailer Hitch Recommendation for a 1989 Prevost Bus

Updated 03/05/2024 | Published 11/18/2018

Question:

Two questions one I need a hitch to attach to a 1989 Prevost bus The best ones on 24 V so I suppose it would need some type of step down voltage regulator

asked by: Mike

Expert Reply:

For a trailer hitch that you should be able to use on your 1989 Prevost Bus, I recommend taking a look at the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 or part # 41990-07. These trailer hitches are both universal meaning you can modify the mounting brackets to fit the frame rails on your bus and then bolt or weld them into place. This will be the only option we have for you as they do not make a custom bolt-on trailer hitch for your application.

For a trailer wiring harness you will want to use something like the Upgraded Circuit Protected ModuLite part # 119178KIT. In order for you to then make this compatible with the 24 volt circuit on your bus you will also need to use a step down converter or 24 volt to 12 volt interface which we currently do not offer.

expert reply by: Conner L

Fred

3/3/2024

What would be a good recomended bolt on trailor hitch for a 98 Prevost XL Le Mirage ? Where could i order it from

Mike L.

3/5/2024

@Fred We offer several different multi-fit RV hitches. The exact hitch you'll need will depend on the distance between the frame members on your motorhome, but the Curt # 13703 fits motorhomes with frame member spacing from 22-72 inches and would be your best bet. You can order it from us, using the provided link:

Helpful Links

dept-pg-rv_and_camper_hitch.aspx