Timbren or SumoSprings Recommendation for 2018 Toyota Tundra

Question

Question:

I have a 2018 Toyota Tundra, which would you recommend a Timbren or a Sumospring kit?

asked by: Lance

0

Expert Reply:

I prefer the SumoSprings kits over the Timbrens for your 2018 Toyota Tundra. The reason I do is because the Timbrens have a reputation as being harsher when the truck is unloaded. So for your truck I would recommend the # SSR-610-47 which will give you the suspension support you want but without making your ride quality harsh when the truck isn't loaded.

expert reply by: Jameson C

0

Answer 1

Hey Tom! The SumoSprings Solo Custom Helper Springs #SSR-610-47 are a great option for eliminating that rear squat. These will give you 1,500 lbs of load support and won't ruin your unloaded ride quality like some other solutions. Keep in mind,…

view full answer...

Answer 2

Hey John, thanks for reaching out. For your setup, I recommend the SumoSprings Solo Custom Helper Springs #SS48DR. With a trailer in the 6,400 to 7,000 lb range and nearly 1,000 lbs of tongue weight, they'll do an excellent job reducing squat and…

view full answer...

Answer 3

Hey, Allen! All depends on what you're towing. Would you be able to give me some information such as what kind of trailer(s) your towing, is there going to be any sort of gear or equipment in the truck bed, and lastly does your truck have any…

view full answer...

Answer 4

Since you want support, ride quality, and would prefer an economical price the SumoSprings Solo kit part #SSR-610-54 would be exactly what you want for your 2016 Toyota Tundra. This is the best blend of the things you are wanting and will do a great…

view full answer...

Answer 5

Weight distribution (WD) systems actually take on the weight of any cargo behind the rear axle of the tow vehicle (your 2010 Toyota Tundra) as well as the tongue weight (TW) of the loaded trailer. This is why you are finding that your WD system…

view full answer...

Answer 6

Hey Paul, thanks for reaching out again! Looking into suspension enhancements can be exhausting and overwhelming, especially when you've found a solution that works for you but it seems like there is a better alternative out there. You've…

view full answer...

Answer 7

The system you have should do a great job for your trailer, and since it was working correctly on your previous truck it more than likely needs to be adjusted to your new truck to get it back to performing correct. Based on the pictures it looks like…

view full answer...

Answer 8

An improperly loaded trailer can definitely contribute to porpoising. Tongue weight on your travel trailer should be 10-15% of the loaded trailer weight. You can find this by picking up a scale like #e99044 or you can use one of the other methods…

view full answer...

Answer 9

I checked with SumoSprings and the #SSR-610-47 that you referenced is 5 inches tall, 8 inches in width, and 11 inches in length with a diameter of 4 inches.

view full answer...

Answer 10

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist. These…

view full answer...

Answer 11

The difference between the two SumoSprings Solos kits for your 2013 Toyota Tundra is the weight capacity for either. The part #SSR-610-47 provides 1,500 lbs of suspension support and the #SSR-610-54 has 2,800 lbs of capacity. Since you said you…

view full answer...

Answer 12

You can definitely use SumoSprings with a weight distribution hitch like your Fastway e2 #FA92-00-1000 on your 2016 Toyota Tundra. What you want to do is install the SumoSprings and then adjust your weight distribution set up, like you mentioned.…

view full answer...

Timbren or SumoSprings Recommendation for 2018 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching