Dimensions of SumoSprings # SSR-610-47

Question

Question:

How tall is the sumo spring part number SSR 610-47 including mounting bracket. Rear

asked by: Daniel

0

Expert Reply:

I checked with SumoSprings and the # SSR-610-47 that you referenced is 5 inches tall, 8 inches in width, and 11 inches in length with a diameter of 4 inches.

expert reply by: Jameson C

0

Answer 1

Weight distribution (WD) systems actually take on the weight of any cargo behind the rear axle of the tow vehicle (your 2010 Toyota Tundra) as well as the tongue weight (TW) of the loaded trailer. This is why you are finding that your WD system…

view full answer...

Answer 2

The system you have should do a great job for your trailer, and since it was working correctly on your previous truck it more than likely needs to be adjusted to your new truck to get it back to performing correct. Based on the pictures it looks like…

view full answer...

Answer 3

Since you want support, ride quality, and would prefer an economical price the SumoSprings Solo kit part #SSR-610-54 would be exactly what you want for your 2016 Toyota Tundra. This is the best blend of the things you are wanting and will do a great…

view full answer...

Answer 4

I prefer the SumoSprings kits over the Timbrens for your 2018 Toyota Tundra. The reason I do is because the Timbrens have a reputation as being harsher when the truck is unloaded. So for your truck I would recommend the #SSR-610-47 which will give…

view full answer...

Answer 5

An improperly loaded trailer can definitely contribute to porpoising. Tongue weight on your travel trailer should be 10-15% of the loaded trailer weight. You can find this by picking up a scale like #e99044 or you can use one of the other methods…

view full answer...

Answer 6

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist. These…

view full answer...

Answer 7

The difference between the two SumoSprings Solos kits for your 2013 Toyota Tundra is the weight capacity for either. The part #SSR-610-47 provides 1,500 lbs of suspension support and the #SSR-610-54 has 2,800 lbs of capacity. Since you said you…

view full answer...

Answer 8

Hey, Allen! All depends on what you're towing. Would you be able to give me some information such as what kind of trailer(s) your towing, is there going to be any sort of gear or equipment in the truck bed, and lastly does your truck have any…

view full answer...

Answer 9

You can definitely use SumoSprings with a weight distribution hitch like your Fastway e2 #FA92-00-1000 on your 2016 Toyota Tundra. What you want to do is install the SumoSprings and then adjust your weight distribution set up, like you mentioned.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Dimensions of SumoSprings # SSR-610-47

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching