Parts Needed to Flat Tow 2019 Subaru Crosstrek with Manual Transmission

Published 11/07/2018

Products Featured in This Question

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3257)

$575.00

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(368)

$1602.80

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3104)

$156.17

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(396)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(645)

$67.75

12 Volt Outlet Kit, 20 amps

(319)

$34.53

Question:

What parts do I need to order to tow a 2019 Subaru Crosstrek 6 speed manual transmission behind a 2016 Winnebago Sunstar LX 27N?

asked by: Jeanie B

Helpful Expert Reply:

First thing you'd need to flat tow your 2019 Subaru Crosstrek manual transmission with is a base plate kit that's a confirmed fit. For that you'd want the Roadmaster EZ5 kit part # RM-52927-5 will fit and work well. It has removable arms too so that when not in use you can remove them and the front of the vehicle would look stock.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. An easy system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. You will also need the # RM-9332 for installation.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.