How to Determine Placement of Yakima 60" HD Tracks on an ARE Truck Cap

Question

Question:

I have an ARE z series truck cap and I want to add the roof rack rails. The cap does not have any rails now. Can you tell me the specifications of where to mount your rails? The inside of the cap has a raised portion. Is it supposed to be in the thinner part of the ceiling just passed the raised portion? Thank you for your help.

asked by: Joel F

0

Expert Reply:

Hey Joel, thanks for reaching out!

Since the Yakima 60" HD Tracks # Y74MR are universal the instructions are somewhat vague on where to install them because each application will vary.

The instructions are attached to this answer page but I've cut out the part about positioning the tracks and attached it to this page for your reference as well.

expert reply by: Jon G

0

Instructions for Positioning the Yakima 60" HD Tracks
(click to enlarge)

Jon G.

11/10/2024

Yeah this says nothing but the obvious. I'm asking if you have the specifications or do I need to reach out to ARE?

Jon G.

11/11/2024

@JonG No. I don't have specifications. You can try reaching out to ARE for that information if you'd like.

Answer 1

Hey Steve, so the tracks on the top of your camper shell were designed to fit several roof rack brands but the best option overall and for the money is the Rhino Rack roof rack for camper shell tracks part #Y02-490B-NT as this gives you a higher…

view full answer...

Answer 2

The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…

view full answer...

Answer 3

Hey Melinda, it is possible to fit two of the Thule Hullavator kayak carriers #TH898 on the roof of your 2016 Ford Explorer but you will need to install and aftermarket roof rack with slightly longer crossbars like the Rhino Rack part #RR98VE. Your…

view full answer...

Answer 4

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 5

Hey BJ, that is a really good question. When we measured the tracks that come with the Yakima HD Tracks part #Y92AR they are actually 24-1/2 inches like you can see in the attached picture.

view full answer...

Answer 6

Hey, Jim. You can definitely use rivets instead of the T-bolts to attach the tracks for the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to your roof. We’re not able to swap the bolts out for rivets before shipping, but you should be…

view full answer...

Answer 7

Hey Michael! To add Yakima HD Crossbars like #Y01158 to the TrackTowers #Y52AV you need the HD Bar Adapter for Yakima Streamline Towers #Y03541. Are you adding crossbars to a camper shell?

view full answer...

Answer 8

Hey Malcom. The highest capacity tracks we have are going to be the ones for Yakima HD bars. We have them in three different lengths depending on how big of a camper shell you have. I have listed them below: 54" - Yakima HD Tracks for Roof Racks…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

How to Determine Placement of Yakima 60" HD Tracks on an ARE Truck Cap

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching