Auxiliary Diesel Tank and Toolbox for 2015 Ram 3500 with No Bed and 5th Wheel Hitch

Question

Question:

I want AMD need to install an auxiliary tank with toolbox in my 2015 Ram 3500 with NO bed and already have a Curt fifth wheel with OEM plugs. What is your suggestion?

asked by: Anderson D

0

Expert Reply:

We do have combo transfer tank/tool box # DZ92740X from Dee Zee which holds 43-gallons of diesel fuel and that measures 54" long x 18" deep x 17-3/4" tall. Since your truck does not have a bed you will probably need to have some fabrication done to provide mounting points. I cannot tell from your photo what space is available right behind the cab for mounting a tank so you'll want to compare this to the tank/tool box dimensions.

You'll also need Connector Kit # DZ97962 (made for you Ram 3500) to tie the additional tank into your fuel system. This operates on a gravity feed. The diesel fuel valve must be closed during vehicle operation and only opened to gravity feed the vehicle diesel tank during stops.

expert reply by: Adam R

0

click to enlarge

Answer 1

The lube plate #RP83001 will do the job to keep your pin box from scraping as it slides onto the head of your Reese M5 5th Wheel Trailer Hitch #RP30922 but you can also grease the jaws using a grease gun like #L30132 to apply grease to the grease…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Robert congrats on the new truck! In bed hitch includes the puck system as well when it comes to fitment of the air bag kit brackets. For your 2026 Ram 3500 with the factory puck system, I recommend the Air Lift LoadLifter 7500 XL Air Helper…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 12

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

view full answer...

Auxiliary Diesel Tank and Toolbox for 2015 Ram 3500 with No Bed and 5th Wheel Hitch

Products Featured in This Question

Continue Researching