Suspension Needed for a 1973 Trillium Travel Trailer

Updated 10/08/2018 | Published 10/06/2018

Products Featured in This Question

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear

(384)

$50.25

Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs

(112)

$967.14

3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long

(2246)

$31.06

Question:

Hi , We own a 1000 # 13 foot trailer made in 1973. It does not have a suspension at all and wonder if we should add one and if so what type? thanks,

asked by: Rich A

Expert Reply:

Adding suspension to your trailer is definitely beneficial as it helps to reduce stress on the frame. The most common type of suspension system for a trailer is one that uses leaf springs. To install this you would need a hanger kit like part # APS4 and then leaf springs like part # e84SR which are used if you have an axle diameter of 1-3/4".

We also carry the Timbren Axle-Less Trailer Suspension Systems like part # A12RS440 which includes hubs that have a 4 on 4" bolt pattern. I like to recommend these because they are much easier to install than a hanger kit and leaf springs plus they require less maintenance. There is a price increase included with this though.

If you can send me a picture of the axle on your 1973 Trillium trailer I can help you determine which would be the best setup for you.

expert reply by: Jon G