Total Height of Fast Way Hitch Ball Mount with 10 Inch

Question

Question:

how tall is it from the top of the shank to the bottom of the bottom ball with it set in the most dropped position? i want to know how much ground clearance im going to lose.

asked by: Paula

0

Expert Reply:

I went out to the warehouse and measured from the top of the shank to the lowest point of the ball mount # LTB10-2 and it measures about 15-3/4 inches.

expert reply by: Charles S

0

click to enlarge

Answer 1

There is one adjustable ball mount that has a 12 inch rise, but a couple of others that have an 11 inch rise which you can also use and are less expensive; you just need to be within an inch of the correct rise (or drop). So here are the options for…

view full answer...

Answer 2

The hitch ball are not removable from the ball platform on the Flash Solid Steel Adjustable 2-Ball Mount part #FA49-00-5900. If you looking for an adjustable drop hitch which does not come with a hitch ball we do offer the Adjustable Ball Mount for…

view full answer...

Answer 3

Hey John! Sorry, but Fastway does not make a pintle hook attachment for their Flash Strong Solid Steel 2-Ball Mount item #FA49-00-5900 and their shank is not compatible with other manufacturers. For a ball mount that has a comparable drop and…

view full answer...

Answer 4

The Flash Solid Steel Adjustable 2-Ball Mount - 2" Hitch part #FA49-00-5900 itself is pretty solid at those points on the when compared to something like the MaxxTow adjustable mount which seems to be very loose fitting. For the adjustable ball…

view full answer...

Answer 5

Choosing the correct amount of drop for your ball mount will depend on a few things. First, with the tow vehicle parked on level ground, you will need to measure from the ground to the top of your hitch receiver opening. Next, with the trailer level,…

view full answer...

Answer 6

I reached out to the manufacturer who said the hitch balls on the Flash Solid Steel Adjustable Ball Mounts are a solid piece that has a bolt running through it inside the mount. What this means is that there is zero chance of it coming apart while…

view full answer...

Answer 7

We have just what you're looking for. The correct hitch for your 2020 GMC Sierra 1500 is the Curt #C15307, which has a 2" receiver and is specifically designed with heavy duty towing in mind. This hitch will easily install without any…

view full answer...

Answer 8

The Flash Solid Steel Adjustable 2-Ball Mount #FA49-00-5900 uses a 5/8" diameter pin to secure the ball mount to the adjustable shank. These holes are spread 1" on center vertically along the shank. As these do not match the information you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Total Height of Fast Way Hitch Ball Mount with 10 Inch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching