Transmission Cooler Recommendation for 2018 Nissan Frontier

Question

Question:

I will be doing some towing with my 2018 Nissan Frontier and want to get a trasmission cooler, which should I get?

asked by: Jack

0

Expert Reply:

The best way to pick out a transmission cooler is to go with a larger one that fits in the available area in front of your 2018 Nissan Frontiers radiator. The most popular option (for good reason) we have is the Derale cooler part # D13503 which measures 11" Wide x 8-3/4" tall x 7/8" deep. This would be a great option to prolong the life of the transmission in your Frontier that will be towing. Basically heat is the number one killer of transmissions so if you can keep them cooler they will last much longer.

expert reply by: Jameson C

0

Answer 1

Hey Daniel, thanks for the information! To tow a trailer with your 2006 Honda Pilot, I recommend the following parts: Hitch - etrailer Trailer Hitch item #e98851 Wiring - 4-Way Connector - Curt T-Connector Vehicle Wiring Harness item #C55336 - 7-Way…

view full answer...

Answer 2

Hey Michael, thanks for reaching out. For the 2007 Honda Pilot 3.5l V6, what I recommend is the Derale Series 8000 Plate-Fin Transmission Cooler Kit #D13503. This is a highly efficient class 3 cooler. Adding this will help your transmission perform…

view full answer...

Answer 3

I recommend using the Derale Series 8000 Class III Transmission Cooler #D13503 which is a fit for your 2018 Nissan Altima whether it has a 2.5L or a 3.5L engine. The best place to mount a transmission cooler is between the grille and the AC condenser…

view full answer...

Answer 4

Hey Jesse, cool name! I see you already got the Redarc #RED82CR on order but I wanted to reach out and make sure your question was answered. Yes, it does come with the mounting panel for the knob, so you won't need to buy that separately. It…

view full answer...

Answer 5

Since that WD system has been discontinued for so long all of the replacement parts for it are gone. At least from us. It would be a real challenge but maybe elsewhere there is a company that still has them. I would recommend going with an all new…

view full answer...

Answer 6

If the trailer you plan on towing weighs more than half of the weight of the tow vehicle we recommend the use of weight distribution. For your vehicle/setup I would strongly recommend a WD system. Especially considering how many passengers and cargo…

view full answer...

Answer 7

The transmission return line on your 2005 Honda Pilot can be located between the frame crosstube and the drivers side support bracket (see photo). The return line will be the line closest to the front of the vehicle. We installed Derale Series 8000…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The best way to pick out a transmission cooler is to go with a larger one that fits in the available area in front of your 2018 Nissan Frontiers radiator. The most popular option (for good reason) we have is the Derale cooler part #D13503 which…

view full answer...

Answer 11

Thanks for the picture and your patience! I did some research and made some phone calls, the correct replacement for your actuator is the Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs item…

view full answer...

Transmission Cooler Recommendation for 2018 Nissan Frontier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching