When To Use a Weight Distribution System When Towing with a 2011 Honda Odyssey
Published 09/10/2015
Question:
I have a 2011 honda odyssey at approx 4500# with 45 of weight in back and usually travel with the family of four plus stuff. I just got a aerolite cub 160 weighting 3000# wet but up towards the 3500# and was interested in your opinions on me getting a weight distribution hitch/sway bar for the van. I havent hooked it up yet but with the soft suspension have and idea that the rear is going to sag under any weight. I see that you have some light duty products for something this light. Is it worth it or even necessary? Thanks for your help
asked by: Randy W
Expert Reply:
If the trailer you plan on towing weighs more than half of the weight of the tow vehicle we recommend the use of weight distribution. For your vehicle/setup I would strongly recommend a WD system. Especially considering how many passengers and cargo you will be carrying.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup. You should note that the weight of any cargo behind the rear axle of your vehicle should be considered tongue weight as well. I attached an FAQ on determining tongue weight for you to check out.
Once you know your tongue weight you will want to check out the link I attached that has all of the weight distribution systems we carry. You will be able to select your tongue weight from the filters to see what would be rated for your setup.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Transmission Cooler
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Search Results: roof bars
- Search Results: single bar weight distributing hitch
- Shop: Trailer Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: hitch receiver
- Search Results: towing/load leveling vehicle suspension
- Search Results: suspension enhancement
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Roof Rack
- Video: All You Need to Know About the Curt Clamp-On Bike Rack for 3 Bikes
- Q&A: Weight Distribution Replacement Solution Reese Mini 350 with Lost Components
- Shop: Fastway e2 Weight Distribution w/ Sway Control - Trunnion - 4,500 lbs GTW, 450 lbs TW
- Shop: Curt Clamp-On Bike Rack for 3 Bikes - 2" Ball Mounts
- Shop: TowSmart Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Shop: Suspension Enhancement
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Article: How to Measure for Trailer Hitch Drop
on Weight Distribution Hitch
