Replacement for AL-KO 1530116 and 1530117 Brakes

Updated 10/01/2018 | Published 09/29/2018

Products Featured in This Question

etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K

(3177)

$179.38

etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs

(735)

$127.48

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1280)

$91.21

Question:

Do you have replacement brake assemblies for AL-KO brand , part numbers 1530116 and 1530117? These are the 10x1.75 inch brakes. If so, how much and I may need some bearings and inner seals for the same axle. I think the part #s are L68149, L44649, L68111, L44610 and the seal is 568886. Can you give me individual prices. I may be able to match the bearings/races locally but cantfoot find the brake Assemblies. Thanks for your help.

asked by: Jimmy

Expert Reply:

I do have an option for you but we don't carry any braking assemblies that are 10" diameter x 1-3/4" wide. These are an oddball size and would be best replaced with something more modern so you can access replacement parts if needed. There would also be an upgrade in regards to braking power.

For this, I recommend using the Electric Trailer Brake Kit part # AKEBRK-35-SA for self-adjust or part # AKEBRK-35 for manual adjust. These will be a direct replacement, no drilling or cutting required. However, you will need to change out the hub/drum as well since you have upgraded to a new size. For this, I recommend the Trailer Hub and Drum Assembly part # AKHD-545-35-K.

I have attached review videos for you as well. This is the only option we have for you unfortunately but a better one in my mind.

expert reply by: Conner L