Weight of Installed BAK Revolver X2 Hard Tonneau Cover # BAK39121

Question

Question:

Whats the installed weight of this tonneau cover?

asked by: Ron

0

Expert Reply:

The BAK Revolver X2 Hard Tonneau Cover # BAK39121 referenced in your question has an overall installed weight of just about 90 pounds.

I have attached a short video demonstration on this particular tonneau cover that you can also check out.

expert reply by: Chris R

0

Answer 1

The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…

view full answer...

Answer 2

The Reese M5 Series 5th Wheel Trailer Hitch Part #RP30921 weighs 154 pounds that includes the head, center section and legs. The Reese M5 is the lightest fifth wheel hitch option for the 2019 Ford F-350 puck system that does not require an adapter to…

view full answer...

Answer 3

We do indeed offer a performance tuner that's CARB approved. I'd recommend the Superchips #SU4845 Flashpaq F5 Performance Tuner which can add up to 23.7 HP and up to 22.4 Torque.

view full answer...

Answer 4

Hey Anthony, the weight of the BAKFlip MX4 Hard Tonneau Cover #BAK78AV that you referenced is 71 lbs. Basically all of the retractable and hard tonneaus are going to weight more since there is a lot of components involved. I'm actually impressed…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Weight of Installed BAK Revolver X2 Hard Tonneau Cover # BAK39121

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching