Width of ComeUp Cable Tensioner for DV-12, DV-15, and DV-18 Winches # CU881087

Question

Question:

How wide is this tensioner ? I have an XBull wench the drum size is 224mm or 9.6 inches wide. Please let me know the dimensions of the tensioner. Thanks

asked by: Lloyd C

0

Expert Reply:

See the attached photos. The first photo shows the mounting bolts, which are 10” apart, center to center. The second photo is the roller, which is 8” in width. The last photo shows the roller bracket, which is 7.25” in width.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The springs of the #BDW20234 are not available separately. Only solution will be to go with the #BDW20234 to replace all of what you have. This does match what you sent in a picture of.

view full answer...

Answer 2

The Tensioner for Bulldog Winch Standard Series Truck Winch - Wire Rope #BDW20234 or the ComeUp Cable Tensioner for DV-12, DV-15, and DV-18 winches #CU881087 are the only options for that size a winch. We have not tested them on a Smittybilt x20…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Width of ComeUp Cable Tensioner for DV-12, DV-15, and DV-18 Winches # CU881087

Product Page this Question was Asked From

Continue Researching