Replacement Hub/Drum Recommendation for 1996 Coachmen Catalina
Published 08/31/2018 >
Question:
Just purchased two right and left Dexter replacement full electric brake assemblies measuring 10inch with 1 1/2inch shoes for 3000 lb axle, from your company Rep.: Goeffery F. to fit my 1996 Coachmen Catalina 27foot travel trailer. Discovered I need two replacement hub and drum assemblies also one at very least. Does your company stock these items? If so, are inner and outer bearings and grease seal included or separate items? Please, if you carry them, what is the purchase cost of each item and stock numbers so that I can place an order. Much thanks,
asked by: Reginald M
Helpful Expert Reply:
Based on what I know so far about your trailer the hub/drum that would most likely be what you need is the Dexter hub/drum part # 84546UC3-EZ which is for a 3,500 lb axle like what your brake assemblies are for. This comes with bearings and a seal plus a cap. You'd want to verify your bolt pattern as being 5 on 4-1/2 inches like what this hub fits.
If you have a different bolt pattern I attached a page that has all of the 3,500 lb hub drums we offer for you to check out. You'll be able to select the bolt pattern you need from the filters on the page.
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: What to Know About the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Brake Lining/Shoes for 1996 Coachman Catalina with Dexter 8-283 Hub
- Shop: 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Q&A: Which Bearings, Races, and Seal Fit Dexter Hubs 8-283
- Q&A: Replacement Bearings, Races, Grease Seal and Tools Needed For Dexter 8-283 Brake Drum/Hubs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: Replacement Race L44610 for Bearings L44643 and L44649 - Qty 1
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer hitch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Brake Controller
- Search Results: trailer brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Search Results: trailer lights
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Search Results: trailer hubs and drums

