Comparing the Stromberg Carlson Trailer Jacks # JET-5000NG VS JET-5000

Question

Question:

WHICH ON IS BETTER? I SEE THE NG HAS BALL BEARINGS AND EXTRA LIGHTING. OTHER THAN THAT IS THERE ANY OTHER BIG DIFFERENCES? THANK YOU FOR YOUR JELP

asked by: SHANE

0

Expert Reply:

All-around the Stromberg Carlson Electric Trailer Jack # JET-5000NG is nicer than the # JET-5000. The bearings in the part # JET-5000NG allow it to raise and lower much smoother and quicker, the size of the head is a bit smaller and the lighting is nicer too. For how similar the price is between the two the # JET-5000NG really is the winner.

expert reply by: Jameson C

0

Answer 1

Hey Carl, that will depend on a few dimensions on your truck and trailer that we don't know but I can still help. When the jack part #JET-5000 is installed it will be 23 inches above the mounting bracket like you see in the attached picture. If…

view full answer...

Answer 2

Hey Mike! The etrailer Electric Trailer Jack #e55ZV would be a great replacement for the jack on your 2021 Jayco Jay Flight 242BHS. This has the same lift as your existing jack but with a higher 5,000 lb capacity making it a nice upgrade. It also…

view full answer...

Answer 3

To replace your FIC 3500 electric jack, I recommend the Ultra-Fab Electric A-Frame Jack item #UF38-944017. This jack extends 6" in 25.3 seconds with 1,000 lbs of tongue weight. It has an easy bolt-on or weld-on installation for A-frame trailers,…

view full answer...

Answer 4

Hello Adam, We can definitely get you set up so you can accomplish getting the ramp up to your tailgate. However, it is not recommended to use a hitch extender with a weight distribution system. The good news is that you can use the Equal-i-zer…

view full answer...

Answer 5

Without knowing your trailer's dimensions it is difficult to generalize about this jack clearing your open tailgate but you can measure the clearance you need for your Ford Expedition's open tailgate to clear the top of your trailer tongue…

view full answer...

Answer 6

Since the Ultra-Fab Electric A-Frame Jack #UF97FR has a triangular bolt pattern it would rotate the jack 120 degrees and may or may not work for your application. There are other jacks which have multiple mounting patterns on the flange like the…

view full answer...

Answer 7

The Stromberg Carlson Electric Trailer Jack#JET-5000 that you referenced in your question has a distance of 23 inches from the mounting bracket to the top of the jack. You can measure this distance up from the A-frame of your trailer to see exactly…

view full answer...

Answer 8

I spoke with my contact at Stromberg Carlson and she told me that the Stromberg Carlson Electric Trailer Jack, #JET-5000, sits 23 inches above the mounting location on the A-frame coupler.

view full answer...

Answer 9

Yes! For a great cover to protect your Ultra-Fab Electric A-Frame Jack #UF97FR, you need the Ultra-Fab Protective Cover for Electric A-Frame Jacks #UF38-944020. This cover is specially designed to protect the jack motor from rain, snow, and dirt.

view full answer...

Answer 10

If you wanted to turn the Stromberg Carlson Electric Trailer Jack #JET-5000 before attaching to the a-frame of your trailer you certainly could. This would allow the front of the jack to be turned so that you'd have more clearance for your…

view full answer...

Answer 11

Sounds like something loosened itself up after the first trip. I recommend lifting the cover and retightening the bolts on the Stromberg Carlson Electric Trailer Jack item #JET-5000. You'll want to check the mounting bolts too.

view full answer...

Answer 12

Stromberg Carlson has headquarters in Michigan, but the Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black Item #JET-5000, is manufactured in China. This bolt-on electric jack offers a 5000-lb lift capacity and carries a…

view full answer...

Comparing the Stromberg Carlson Trailer Jacks # JET-5000NG VS JET-5000

Products Featured in This Question

Continue Researching